Interesting weight
- Thread starter Onthesauk
- Start date
- Views: 1501
OP
Onthesauk
Silver Member
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If you search around you will find others. I made a 600# or so weight from a used plastic tub, crete' and some iron... cost about 15$
Soundguy
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If you search around you will find others. I made a 600# or so weight from a used plastic tub, crete' and some iron... cost about 15$
Soundguy
Soundguy
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,650
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
It is 'slick', IF it is iMatch (quick hitch) compatible.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,650
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
It is 'slick', IF it is iMatch (quick hitch) compatible.
Highbeam
Super Member
It would be good for a light and small tractor with meager lifting ability. Even my little 30 HP tractor's manual specifies 700 lbs of ballast for FEL work for less than 1000 lbs of lift. It sure looks clean. The guy looks to be trying to get into business.
Highbeam
Super Member
It would be good for a light and small tractor with meager lifting ability. Even my little 30 HP tractor's manual specifies 700 lbs of ballast for FEL work for less than 1000 lbs of lift. It sure looks clean. The guy looks to be trying to get into business.
OP
Onthesauk
Silver Member
Funny. I saw that online this morning. Then coming back from town I saw an identical one sitting outside a shop. Someone must be selling them in the NW.
OP
Onthesauk
Silver Member
Funny. I saw that online this morning. Then coming back from town I saw an identical one sitting outside a shop. Someone must be selling them in the NW.
AndyMA
Elite Member
- Joined
- Oct 11, 2000
- Messages
- 3,714
- Location
- Windham County, Conn
- Tractor
- Ford 2120 , Kubota MX5200 , Deere X748SE. 1956 Economy Tractor
My dealer has been selling an almost identical shaped version of the same thing minus the trailer hitch for well over 20 years. I have a 1000 lb version I use on the 2120 and TN.
Andy
Andy
AndyMA
Elite Member
- Joined
- Oct 11, 2000
- Messages
- 3,714
- Location
- Windham County, Conn
- Tractor
- Ford 2120 , Kubota MX5200 , Deere X748SE. 1956 Economy Tractor
My dealer has been selling an almost identical shaped version of the same thing minus the trailer hitch for well over 20 years. I have a 1000 lb version I use on the 2120 and TN.
Andy
Andy
PineRidge
Super Member
Why not, crete is cheaper than steel and the mold would be easy enough to make from plywood & 2X4s. If someone really wanted to get tricky they could cast steel caster wheels in the base to help moving when disconnected in the barn.
PineRidge
Super Member
Why not, crete is cheaper than steel and the mold would be easy enough to make from plywood & 2X4s. If someone really wanted to get tricky they could cast steel caster wheels in the base to help moving when disconnected in the barn.
