Intercooler on 4x20?
- Thread starter Cperk
- Start date
- Views: 3701
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
The 4720 already has one. I thought all the 4x20’s had them. If not, it should be easy to add the components.
My 4120 doesn’t and there’s not a lot of room between the turbo cold discharge and intake manifold. Like maybe 1.5” at the most.
there’s about 3/4” in between the hose clamps.
Last edited:
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
Look at this link to jdparts. See is these parts could fit
Don’t think there’s enough room for the elbows without moving the turbo outward.
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
See if the 4720 has a different turbo bracket. Both the 4720 and the 4120 have the same block and the same chassis, so if you want to buy a few parts, you can for sure make it happen.
It could easily be 2-3K for the parts though. What do you hope to accomplish? I would be surprised if you gained 5 hp.
It could easily be 2-3K for the parts though. What do you hope to accomplish? I would be surprised if you gained 5 hp.
As hot as the intake temps are I would have thought it would be more hp. Though I might add the debris getting stuck in between the cooler and the radiator might be a hassle. I just have to blow the radiator out now. The screen catches most of it. Not worth 2k. But I would like to think that the longevity would be better?
arlen4720
Veteran Member
- Joined
- Jul 6, 2012
- Messages
- 1,277
- Location
- Southeast Minnesota
- Tractor
- JD 4720, JD X748SE, JD 997, Farmall "B", Gator 865R, JD 320D Skid Steer
I just checked...The intercooler is $570.00 so you could probably get all the parts for $1200 or so.
The early 4520 had 5 more hp than the 4320 (before the 4520 got an electronic controlled engine). The 4520 has an intercooler and the 4320 does not.
I don’t know how much the intercooler will contribute to overall longevity. Maybe some of the diesel experts could quantify that.
Zebrafive
Super Member
Have you checked the cost to trade tractors?
Love my 2008 4120. Owned it since new and do not want to trade for a new with DEF and all that crap. I would not want a used one either as I’m a stickler on maintenance and don’t want one that someone else has improperly maintained.