Installing Winch on RTV 500

   / Installing Winch on RTV 500 #1  

DIXIEDOG

Platinum Member
Joined
May 10, 2009
Messages
828
Location
Maine
Tractor
International 2544 / Gator 825i/L2501/General
Since I'm tighter than bark on a tree I didn't opt for the dealer to install my winch on the RTV 500 I bought so now I've got to pick one up and put it one. Besides the winch, wiring, and the roller fairlead do I need any special brackets to mount the winch to? Are there already holes in the frame to hold a winch?
 
   / Installing Winch on RTV 500 #2  
Since I'm tighter than bark on a tree I didn't opt for the dealer to install my winch on the RTV 500 I bought so now I've got to pick one up and put it one. Besides the winch, wiring, and the roller fairlead do I need any special brackets to mount the winch to? Are there already holes in the frame to hold a winch?

There are mount holes above the front hitch receiver..Not sure how universal the mountings are though.
 
   / Installing Winch on RTV 500 #3  
My Trans Mule diesel weighs in around 1700 lbs. dry so I installed a Warn RT40. The weight of your rig will dictate the winch power required. Plan on installing a winch that is at least rated double the LOADED weight of your RTV 500.
 
   / Installing Winch on RTV 500
  • Thread Starter
#4  
My Trans Mule diesel weighs in around 1700 lbs. dry so I installed a Warn RT40. The weight of your rig will dictate the winch power required. Plan on installing a winch that is at least rated double the LOADED weight of your RTV 500.

I planned on putting a 2500lb on there like the dealer does I just didn't want to pay their price for one. I wasn't sure if I needed any additional brackets or plates to install it though, I just want to have everything I need for the install before I try to put it on.
 
   / Installing Winch on RTV 500 #5  
If the RTV 500 is anything like the RTV 900, there is a pre-drilled mounting plate under the hood. The winch and fairlead stay inside, and you pull the cable out a hole in front.

I opted to make my own adapter plate and install the winch outside on the bumper/grill ***'y. Kubota is useless in their documentation telling the owner about the drilled plate under the hood.

Good luck! My winch gets a lot of work, and I can highly recommend the synthetic line you can buy on Ebay; it's flexible, strong, doesn't stretch, and doesn't fray.
 

Tractor & Equipment Auctions

Terry 12ft Aluminum Jonboat (A50324)
Terry 12ft...
Pallet Fees (A50775)
Pallet Fees (A50775)
3 PHASE SEPARATOR (A52472)
3 PHASE SEPARATOR...
Toro Mower (A50324)
Toro Mower (A50324)
2014 Chevrolet Spark Hatchback (A50324)
2014 Chevrolet...
2016 Ford Escape AWD SUV (A50324)
2016 Ford Escape...
 
Top