Kirk-NJ
Gold Member
- Joined
- Sep 20, 2009
- Messages
- 413
Looks good. Those compact hoes are really good for working it tight spots.
Kirk
Kirk
Installing a New Holland backhoe on a Ford 850
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i thought the frame looked superior. I have a superior on my 850 that has my 650 woods hoe. 
It's a Superior loader frame but it may not all be stock. The arms look a lot like a Dual and the bucket is a rplacement. Had to lengthen the bucket because it was so small and just replaced the tilt cylinders because when the loader was up the bucket wouldn't tilt enough to dump the load. If I got stuck I couldn't use the bucket to back up with. No problems now.
This arrangement works a lot better than with the Dexta. With the loader and outriggers down it's now a very stable platform. I think sometime in the future I'm going to look for a smaller pump as this one pumps so much fluid that it puts a pretty good load on the engine. The good part is that at 1000 rpm it moves plenty fast.
