Snow Install/operation manual for the 2360 snowblower

[MF RED in MT]

I remembered that Red did post the ToC for that DL100 (and CB05) manual and referring back to that post it is the "Lubrication and Maintenance" chapter I'm most interested in. Pages 37 to 40.

For the CB05 there are two brief sections: Operation, pages 29-30, and Lubrication and Maintenance, pages 37-44.

If images of those pages could be found, that would be all I'd need.

Yes, I think I snapped a photo of the ToC pages since they do not lay flat in the copier?

Maybe I'll try the copier again for your pages.

KC

 

[MF RED in MT]

I remembered that Red did post the ToC for that DL100 (and CB05) manual and referring back to that post it is the "Lubrication and Maintenance" chapter I'm most interested in. Pages 37 to 40.

For the CB05 there are two brief sections: Operation, pages 29-30, and Lubrication and Maintenance, pages 37-44.

If images of those pages could be found, that would be all I'd need.

Here are the pages for the MF DL100 Loader, I think I can scan pages you requested for the CB05 tomorrow unless someone else takes care of it sooner.

KC

View attachment DL00 P38.pdf View attachment DL100 P37.pdf View attachment DL100 P39.pdf View attachment DL100 P40.pdf

 

[mgstevens]

Here are the pages for the MF DL100 Loader

Very cool! Thanks! They all look useful, some more than others. Good to know what MF says to do to keep these working well. Bolt grade and torque specs, all good.

Not to mention how long you have to get to a qualified surgeon if you inject hydro fluid, willingly or otherwise.

I appreciate it.

Mark

 

[MF RED in MT]

I remembered that Red did post the ToC for that DL100 (and CB05) manual and referring back to that post it is the "Lubrication and Maintenance" chapter I'm most interested in. Pages 37 to 40.

For the CB05 there are two brief sections: Operation, pages 29-30, and Lubrication and Maintenance, pages 37-44.

If images of those pages could be found, that would be all I'd need.

Here are half the pages you requested for the CB05 Back Hoe.

KC

View attachment CB05 P29.pdf View attachment CB05 P30.pdf View attachment CB05 P37.pdf View attachment CB05 P38.pdf View attachment CB05 P39.pdf

 

[MF RED in MT]

I remembered that Red did post the ToC for that DL100 (and CB05) manual and referring back to that post it is the "Lubrication and Maintenance" chapter I'm most interested in. Pages 37 to 40.

For the CB05 there are two brief sections: Operation, pages 29-30, and Lubrication and Maintenance, pages 37-44.

If images of those pages could be found, that would be all I'd need.

Here are the last half of the pages you requested for the CB05 Back Hoe.

KC

View attachment CB05 P40.pdf View attachment CB05 P41.pdf View attachment CB05 P42.pdf View attachment CB05 P43.pdf View attachment CB05 P44.pdf

 

[mgstevens]

Here are the last half of the pages you requested for the CB05 Back Hoe.
KC

Very nice! Thanks a lot KC. If you're ever up this way, or vice versa (it's not that far...) you get a nice meal on me. If there's anything I can do to return the favor, consider it done.

Mark

And hey, I just made "Silver Member" status at 100 posts. I saw users the other day, in much older posts, with well over 100 posts that still showed as 'Bronze Member' status...

 

[MF RED in MT]

Very nice! Thanks a lot KC. If you're ever up this way, or vice versa (it's not that far...) you get a nice meal on me. If there's anything I can do to return the favor, consider it done.

Mark

And hey, I just made "Silver Member" status at 100 posts. I saw users the other day, in much older posts, with well over 100 posts that still showed as 'Bronze Member' status...

You are welcome, glad to be helpful.

Congrats on your Silver Member status.

Thanks for the meal offer, glad the wife does not read these post as she does like a road trip.

For me, I still have difficultly traveling due to my neck surgery over 12 years ago, but hey, I am doing what I can but at a much, much, slower pace.

KC

 

[DJRussell]

I know this is an old thread, but the contents are appropriate. I have a GC2610, and recently bought a used snowblower 2360. I don't have the manual for the blower. I tried online at AGCO parts, but they listed a few models, but I couldn't find my model number listed. I tried sending them a note, but it was returned as their email address seems to be out of commission.

If anyone has a pdf versionl of the operators manual for the 2360 snowblower, and wouldn't mind sending it my way it would be greatly appreciated.

These tractors are wonderful.

Regards

Jim

 

[MF RED in MT]

DJRussell,

Here's what I have for the 2360 operators manual in PDF.

Hope this helps you, KC

 

[DJRussell]

Thank you very much. I was just in the process of installing it, and it came in real handy. I will likely print the pages and put them in the binder with the rest of the manuals.

Regards

Jim