Inherited a New Hobby

[jlgurr]

Hey everyone, not sure if this the correct forum but it seems to fit best here compared to the others.

I really enjoy this site and everyone who helps out others. It feels like a virtual home for me but now, along with my tractor interests, I have started a venture into something new. Grandpa passed away and left his reloading and boolit casting hobby supplies. I have been perusing the net trying to find a good group to join and learn more about these things. Since I enjoy shooting this seems to be a good way to reload and feel like grandpa is still here with me.

Are there any TBN members who are also members of other "clubs" that could help in my new interests. Rather than trying on my own to find a good fit, it would seem that you could make some recommendations.

Thanks,
Jeff

 

[4570Man]

There are plenty of guy here that reload. I'd start another thread about reloading and see what that gets you. I don't visit any reloaded forums. I waste enough time here and over at a woodworking forum.

 

[Gunny]

I'm with 4570man, if I spent as much time on other forums as I do here, I wouldn't have any free time at all, but there are several good reloading forums. If I'm trying to roll a new load and looking for information, I'll go to a few and do a search to see if someone has already done what I'm trying to do.

This is a good one to start with, Brian Enos's Forums... Maku mozo!

 

[mbohuntr]

Google "cast boolits" that IS the correct spelling...

 

[ch1ch2]

bullets is the correct spelling. I can not spell either. I aways failed spelling in school. I rely on spellcheck and my wife.

 

[Hoochy]

Check out 6mmbr.com aka accurateshooter.com
Look for some reloading programs like ExBall and Qickload
Brian Litz, head ballistician for Berger bullets , purchase his latest book and enjoy your new endeavor!

 

[jlgurr]

bullets is the correct spelling. I can not spell either. I aways failed spelling in school. I rely on spellcheck and my wife.

That web site spells it boolits on purpose.

Sent from my iPhone 2.0 using TractorByNet

 

[rhunt]

Good morning Jeff, if you do a lot of shooting you are in luck as now you have probably most of the expensive tools thanks to your grandfather. He probably has lots of reloading books as part of his equipment. All reloaders I know have quite an extensive library of reloading manuals. Good luck on your new hobby!

 

[nybirdman]

Good morning Jeff, if you do a lot of shooting you are in luck as now you have probably most of the expensive tools thanks to your grandfather. He probably has lots of reloading books as part of his equipment. All reloaders I know have quite an extensive library of reloading manuals. Good luck on your new hobby!

Congrats;reloading is great fun.I would purchase some "new" reloading manuals,lots of new powders and bullets available.I hope he left you some supplies also,powder/primers.

 

[mbohuntr]

bullets is the correct spelling. I can not spell either. I aways failed spelling in school. I rely on spellcheck and my wife.

Cast Boolits

 

[the old grind]

Read, read, read ... and downplay data from reloading manuals that have been updated (for new pills/powders, etc). Don't buy a darn thing until you fully understand what you have already. Expect to use <10% of it >90% of the time and vice versa. Rather than save money, expect to spend more in the long run but with experience show your stuff as being worth the effort.

10+ year member at AmmoGuide.com and LoadData.com. Both are pay sites, neither is just a bunch of load recipes. AG has a forum that lately is a much better place to ask than to just search. What paying members can access (esp at AG) cannot be described but is remarkable in depth. (eg; rechambering guide/tool) and an unsurpassed DB of detail info on more calibers than most ever knew existed. LoadData has more articles, but both provide caliber or powder-specific searches, etc.

Also recommend Cast Boolits, 6mmBR/AS, and GBO for good info but know the questions you ask and understand answers in the context of prior experience (where more IS better). Not shooting others' reloads & not trying recipes without starting 10% reduced are among the most basic safety precautions.

Don't expect things to go easily only to find out they are not. Expect things to be somewhat tricky and learn as you go just which details require the most care/precision and thus become 'easier' as you indulge. Take particular note of such as the "blue dot" warning to avoid reduced charges with certain powders or combos. Don't try to be inventive, consistency/accuracy (by o'all quality) will put more game on the table than equaling or besting factory load 'performance'.

For the most part, presses and dies are presses and dies so don't just start buying more gear. Like any tools, it's mastery of the details that leads to safe satisfaction. I usually suggest starting with .45LC, 44Mag, or .38Spl to practice sizing and case prep. (accurate measuring to ~.001" a must)

btw, my faves to reload are .44Mag, .22Hornet, .223, 8 x 57, 9.3 x 57, .338-06, and .30 RAR, none comparable to factory loads in velocity/power but tweaked for accuracy in my guns. What cals are you starting with?

 

[jlgurr]

Congrats;reloading is great fun.I would purchase some "new" reloading manuals,lots of new powders and bullets available.I hope he left you some supplies also,powder/primers.

Well, I've been blessed with a lot of "inventory" and tools. Some of which I am still figuring out but it looks like his primary work was 12 ga. shotshells and .45 cartridges. The shotshells he loaded on a Herters 72M and the 45's on a Herters Model 81. There are some other dies for 30-30 and .300 too.

I shoot more shotgun than rifle but I have a .30-06 too. The Marlin casting tool is for a .38 but haven't found any dies for that yet. I have maybe a 1/2 bushel of shotshells, a large bag of wads, a few dozen CCI primers, a nice beam scale, and oodles of lead shot. Grandpa was a Trap Shooter and also shot a 22 in competition. His leather shooting jacket must weigh 20 pounds.

Have purchased a Lyman Shotshell reloading book and been digging for Herters paperwork. Found everything except info on how to change the shot and powder throws on the reloader of the model 72. From the listing of a Herters loader for sale on ebay I've learned there are washers in the loader to change the amount of powder and shot thrown. Haven't seen different washers in my collection yet.

Jeff

 

[jlgurr]

Read, read, read ... and downplay data from reloading manuals that have been updated (for new pills/powders, etc). Don't buy a darn thing until you fully understand what you have already. Expect to use <10% of it >90% of the time and vice versa. Rather than save money, expect to spend more in the long run but with experience show your stuff as being worth the effort.

Like all my other hobbies, it is more for enjoyment than saving money.

For the most part, presses and dies are presses and dies so don't just start buying more gear. Like any tools, it's mastery of the details that leads to safe satisfaction. I usually suggest starting with .45LC, 44Mag, or .38Spl to practice sizing and case prep. (accurate measuring to ~.001" a must)

btw, my faves to reload are .44Mag, .22Hornet, .223, 8 x 57, 9.3 x 57, .338-06, and .30 RAR, none comparable to factory loads in velocity/power but tweaked for accuracy in my guns. What cals are you starting with?

Looks like I have the most materials for starting with 12 ga. shotshells but later planning on brass in 38 and 40, with maybe some 30-06.

 

[jlgurr]

Here is a casting tool that came with the tools from Grandpa. The mold part is easy to understand but there are a lot of other holes too. Anyone ever seen something like this and know what all the openings and tools do?



Some Bullseye powder


A picture of the powder and shot dispenser on top of the loader


A picture of the shotshell reloader

 

[Gary Fowler]

Man that is one antique of a reloading press. I suppose it gets the job done though. A more modern one would be much easier to use I think.

 

[jlgurr]

Man that is one antique of a reloading press. I suppose it gets the job done though. A more modern one would be much easier to use I think.

We'll soon find out if it will still get the job done. If I had to buy a new press it would not be as worthwhile of a hobby to me. Too expensive to get started from scratch. Besides, a new one wouldn't have as much sentimental value. :cool2:

Sent from my iPhone 2.0 using TractorByNet

 

[JRobyn]

IMHO, the "Reloading" sub-forum on the Ruger.net forum (Reloading - Ruger Forum) is one of the better sources of info. Of course, it IS a public internet forum, so don't use any recipes without independent verification with published manufacturer's data from the powder manufacturer or a reloading manual.

- Jay

 

[jlgurr]

IMHO, the "Reloading" sub-forum on the Ruger.net forum (Reloading - Ruger Forum) is one of the better sources of info. Of course, it IS a public internet forum, so don't use any recipes without independent verification with published manufacturer's data from the powder manufacturer or a reloading manual. - Jay

Thank you for the referral Jay. Since I have three Rugers it makes good sense to join. Like the others said, finding the time to read all that info is going to be the difficult part.

Sent from my iPhone 2.0 using TractorByNet

 

[gsganzer]

Don't take reloading lightly. You need to pay strict attention to what you're doing or you can create a dangerous situation and/or load. Wrong components or load data and little or too much powder as well as changing the bullet seating depth can make ammo unsafe.

When I reload, I don't have anything else going on that can create distractions.

 

[jlgurr]

Very wise words. Thank you for reminding me of Grandpas admonition.

Sent from my iPhone 2.0 using TractorByNet