I'll building a sunshade and need specs on a NH Boomer 30

[BoonDoc]

Hello all. I'm putting together a sun shade for my Boomer 30 and would like to ask anyone who owns one if they can measure the distance between the upright bars on the ROPS. My tractor is some 5 hours from home up at camp and I was intending to get this started before I got there. Plan is to bend some 3/4" rigid conduit. Each end will be bent down vertically and slide into two pipe straps. I'll pull a piece of sun screen fabric across the rods and have the wife sew a stitch on them. Seem inxpensive and straightforward but I just need to know an approximate width. The conduit will bend a bit so it need not be exact. Anyone? Thanks!
Doc

 

[FredH]

Is a TC 30 the same ?

Fred H.

 

[RickB]

Is a TC 30 the same ?

Fred H.

It is not.

 

[FredH]

Thanks for the clarification Rick :thumbsup:

Was not sure , so did not want to give my measurements if not correct .

Fred H.

 

[RickB]

Thanks for the clarification Rick :thumbsup:

Was not sure , so did not want to give my measurements if not correct .

Fred H.

Understood. Exactly why I chimed in.

 

[BoonDoc]

I thank you folks for replying. Fortunately, my neighbor was able to drop by and measure between the ROPS bars. Bought me a bender and some pipe and will see what I can do his weekend.