goneandbrokeit
Silver Member
- Joined
- Jan 26, 2006
- Messages
- 198
Here is a couple of short videos...
If you didn't get to move any snow this year...
- Thread starter goneandbrokeit
- Start date
- Views: 1083
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,491
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Afternoon Goneandbrokeit,
Hey great videos, sound was good too
Full buckets man, full buckets
Hey great videos, sound was good too
Full buckets man, full buckets
OP
goneandbrokeit
Silver Member
- Joined
- Jan 26, 2006
- Messages
- 198
Scott,
Thanks. I admire your work keeping those Farmalls red. Got hooked on tractors yanking trees with an H. Keep'em running.
Thanks. I admire your work keeping those Farmalls red. Got hooked on tractors yanking trees with an H. Keep'em running.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Great videos! Thank you very much!
Two comments:
1) The use of rear ballast is very important if you've only a FEL to push or move snow. I learned this by leaving my back blade behind the shed which was not accesible after the recent snow/sleet/freezing rain storm in southen PA. My first time out resulted in a lot of tire spinning. Once I rigged my ballast box (with about 500-600 lbs of sand in it), I had a much more productive time of it.
2) Your ROPS is folded. Not such a great idea when using a loader.
Two comments:
1) The use of rear ballast is very important if you've only a FEL to push or move snow. I learned this by leaving my back blade behind the shed which was not accesible after the recent snow/sleet/freezing rain storm in southen PA. My first time out resulted in a lot of tire spinning. Once I rigged my ballast box (with about 500-600 lbs of sand in it), I had a much more productive time of it.
2) Your ROPS is folded. Not such a great idea when using a loader.
NIXON
Veteran Member
Roy , Your points are very valid .
But, I can't help but to think that this would make a great tutorial on how to use an FEL to get a full bucket . whether it be snow ,mud , sand , or gravel , Goneandbrokeit has got it down to a Tee . I've read so many threads asking about how to get a full bucket,and all the explanations . But these few short seconds of video are by far the best explanation I've seen .
But, I can't help but to think that this would make a great tutorial on how to use an FEL to get a full bucket . whether it be snow ,mud , sand , or gravel , Goneandbrokeit has got it down to a Tee . I've read so many threads asking about how to get a full bucket,and all the explanations . But these few short seconds of video are by far the best explanation I've seen .
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,261
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Only one good dumping of snow so far this year for us,and like you Sir it does help copeing w/cabin fever pushing back snow banks.
