gsganzer
Elite Member
- Joined
- Jun 11, 2003
- Messages
- 3,156
- Location
- Denton, TX
- Tractor
- L3800 w/FEL and BH77, BX 2200 w/FEL and MMM
I was going through my game freezer to gauge my stock and noticed I had 6 venison roasts. So, I thawed 4 of them and made some jerky today. It took 3-hours a batch on the pellet grill.
Afterward, I put them in portions in vacuum seal bags. One thing I learned is that "Meat!" brand vacuum bags that come in a roll are junk. I bought them at Academy Sports when they were on sale at the end of deer season. I bet I had close to a 60% failure rate of them holding a vacuum after sealing. Upon inspection, they're much thinner than the LEM pre-cut bags I typically use. Also, the roll has lots of wrinkles and is really poor quality. I rebagged all the failed bags with LEM bags and had no issues at all.
I'll be sticking with the LEM pint, quart and gallon bags for all future vacuum seal needs. The LEM bags also have a place to write with a sharpie and a notch to facilitate tearing them open.
I might try my hand at making African Biltong next time.
Afterward, I put them in portions in vacuum seal bags. One thing I learned is that "Meat!" brand vacuum bags that come in a roll are junk. I bought them at Academy Sports when they were on sale at the end of deer season. I bet I had close to a 60% failure rate of them holding a vacuum after sealing. Upon inspection, they're much thinner than the LEM pre-cut bags I typically use. Also, the roll has lots of wrinkles and is really poor quality. I rebagged all the failed bags with LEM bags and had no issues at all.
I'll be sticking with the LEM pint, quart and gallon bags for all future vacuum seal needs. The LEM bags also have a place to write with a sharpie and a notch to facilitate tearing them open.
I might try my hand at making African Biltong next time.