Works
New member
...and the part number is K 9048 for my loader LA 402. My phone is 206 842-6055. My name is Ernie. Thx.
I own a Kubota 7800 and Iｴm looking for used pallet forks...
- Thread starter Works
- Start date
- Views: 1183
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
:welcome:Ernie
deerseeker001
Super Member
- Joined
- Jul 20, 2011
- Messages
- 5,699
- Location
- Central wisconsin
- Tractor
- International 2500a with Loader
Welcome from Wisconsin
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the Kubota Owning & Operating forum.
I moved your thread to the Kubota Owning & Operating forum.
George2615
Super Member
Welcome to TBN.
If your tractor has the standard QA that Bobcat / Skid Steer uses then you can buy forks most anywhere. Used ones are very rare in my area. I looked on CL for almost 10 years for a pair. I made forks for my previous tractor that were fixed (non-adjustable). They rested on the bucket and were held in place at the top center where I had a 2" receiver welded on. Since I recently bought a new tractor with a QA bucket I decided not to adapt my old forks and bought a new set locally for about $500. Mine are 5K rated which is about twice my loader capacity. Titan attachments has similar sets on Ebay for $524 for 42" and up.
If your tractor has the standard QA that Bobcat / Skid Steer uses then you can buy forks most anywhere. Used ones are very rare in my area. I looked on CL for almost 10 years for a pair. I made forks for my previous tractor that were fixed (non-adjustable). They rested on the bucket and were held in place at the top center where I had a 2" receiver welded on. Since I recently bought a new tractor with a QA bucket I decided not to adapt my old forks and bought a new set locally for about $500. Mine are 5K rated which is about twice my loader capacity. Titan attachments has similar sets on Ebay for $524 for 42" and up.
davrow
Veteran Member
I've only been looking for used attachments on Craigslist for 9 months. I have never seen used forks advertised. Good luck! :thumbsup:
Mendonsy
Veteran Member
SailormanEd
New member
I was able to get a set of used forks from work when we got a new forklift. the forklift supplier would not give me a set due to liability issues so we just traded in the old forktruck minus the forks. I took my quick attach Wood bucket to the welder and he made a fork frame for me - wokrs great and easy to switch back and forth.
