I guess it was just time

   / I guess it was just time #1  

kenmac

Super Member
Joined
Feb 13, 2005
Messages
9,824
Location
The Heart of Dixie
Tractor
McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
Had to order a new seat for my yanmar today. The plastic bottom busted out and it just flops around
 
   / I guess it was just time #2  
Mine has a metal bottom? But it also has a huge rip in the vinyl and you can see the foam is ripped too. It's right around the drain. Seat would be waterlogged probably if I didn't keep it under a shed. Probably buy some cheap mower style seat cover for it? And try to make it last another decade. Haha
 
   / I guess it was just time #3  
Duct tape!

Slap it on early, slap it on often!
 
   / I guess it was just time #4  
Flex seal or flex tape whatever they put on the boat bottom. If it’ll hold your bottom in a boat, it should hold your bottom on a tractor.
 
   / I guess it was just time
  • Thread Starter
#5  
Mine has a metal bottom? But it also has a huge rip in the vinyl and you can see the foam is ripped too. It's right around the drain. Seat would be waterlogged probably if I didn't keep it under a shed. Probably buy some cheap mower style seat cover for it? And try to make it last another decade. Haha

heck, mine may be metal too. it broke out where the bracket bolts to the bottom.
I haven't taken it off yet. I just ordered a new one.
I guess It's about 14 yrs old with my 250# butt bouncing up and down on it. something had to give !
 
   / I guess it was just time #6  
That some seat time on it. :thumbsup:
 
   / I guess it was just time #7  
Checking to see if mine was on a pic.. And sure enough. I was looking for this Pic. for a Previous post also. My bet it's the same seat. Mine is just a couple months of 11yrs. that I owned it. The seat is still in great shape also. Way over 750Hrs. Going by the Tach.... Came from the same place I'm sure.. Think I repositioned the Bracket's or something. That's what it looks like so I could move the seat back. I was 225lbs. then and I was a little cramped in the seat being just a YM2000. It was tight and another reason we bought YM2500. I barely fit..
 

Attachments

  • 100_5960.JPG
    100_5960.JPG
    981.4 KB · Views: 127
  • Picture 055.jpg
    Picture 055.jpg
    755.1 KB · Views: 110
Last edited:
   / I guess it was just time
  • Thread Starter
#8  
Thanks Hoye for the fast shipping on the new seat
 
   / I guess it was just time #9  
I was 225lbs. then and I was a little cramped in the seat being just a YM2000. It was tight and another reason we bought YM2500. I barely fit..

I live about an hour away from Fredricks Outdoors and remember sitting on the YM2000 and it being very cramped. My YM2001 seems to have much more room.
 

Tractor & Equipment Auctions

2015 CATERPILLAR 272D2 WHEELED SKID STEER (A50458)
2015 CATERPILLAR...
Headache Rack (A50860)
Headache Rack (A50860)
72In FEL HD Round Back Bucket (A51039)
72In FEL HD Round...
2015 Revere Shasta 27DB 5th Wheel Travel Trailer (A48082)
2015 Revere Shasta...
2013 Chevrolet Impala Sedan (A48082)
2013 Chevrolet...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
 
Top