Hydro Travel pedal not coming back to netural

[MESSMAKER]

Had tractor in to have hydro tube replaced and after getting it back my travel pedal is not operating properly. Crawls forward with foot off pedal and will not start without playing with the pedal to get the safety switch to close. Is there an adjustment?

 

[Dr_Zinj]

Yeah, mine doesn't aways return to the neutral position either. Close to it, but not quite.

 

[hawkeye08]

On the Kubota, sometimes a little lube is needed under the floor on the pedal linkages..

 

[94BULLITT]

Here is some info on the pedal not centering.

 

[MESSMAKER]

Found the problem. Must have run over a small tree while bushogging. It bent the shaft that the shock hooks on. Had it in a slight bind. I unhooked the linkage and straightened the shaft. All is fine now.