Hydro-Gear drives on a 2007 Cub Z-Force 50 need repair, what would you do?

   / Hydro-Gear drives on a 2007 Cub Z-Force 50 need repair, what would you do? #1  

finklea73

New member
Joined
Jul 19, 2008
Messages
6
So after 6 years and approx 1k hours of use, my hydro-gear drives on my z-force 50 have started giving up. Mainly my right side drive. I noticed a chirping sound coming from the right side and after inspection found that the pully/fan has some side wards motion to it. It will run fine as long as you dont pull any hills or heavy turning around trees. With the play in the drive, I am sure it is a matter of time before they completely die.

So I have a dilemma. New drives are about $900 a piece. Other than the drive issues, the mower is in very good condition for a 6 year old machine. I have taken very good care of this mower. I cant decide if I should buy new drives for it or sell it for parts and buy a new mower. It does have 1k hour on the motor and even though it doesn't use oil or smoke it could die anytime i guess.

I am not sure these drives can be rebuilt or if you can even get parts for them.

Suggestions?
 
   / Hydro-Gear drives on a 2007 Cub Z-Force 50 need repair, what would you do? #2  
They are rebuildable. Should cost half or less of new. Main components are pump, center section, and motor if a complete drive, or just pump and section if separate from wheel motor.
 
   / Hydro-Gear drives on a 2007 Cub Z-Force 50 need repair, what would you do?
  • Thread Starter
#3  
Any suggestions on who can rebuild/repair them?
 

Tractor & Equipment Auctions

2017 Nissan Murano SUV (A50324)
2017 Nissan Murano...
2018 John Deere R4038 Self Propelled Sprayer, (A50657)
2018 John Deere...
2020 INTERNATIONAL LT625 SLEEPER (A50854)
2020 INTERNATIONAL...
GARDNER DENVER 480 VOLT AIR COMPRESSOR (A50854)
GARDNER DENVER 480...
2017 Ram 4500 Bucket Truck (A51039)
2017 Ram 4500...
Adams 5 ton Fertilizer Buggy / Wagon (A51039)
Adams 5 ton...
 
Top