Oil & Fuel Hydro fluid

[RJJR]

I'm getting ready for the 50 hour service and was having a hard time finding any of the hydro oils listed in my manual. So, I found the Exxon Mobilefluid 424 at www.use.enco.com for $38 per 2 1/2 gallon jug and free shipping to my door in case someone else is in a similar situation. I know this isn't dirt cheap but I couldn't find any locally and I think it's good oil.
Thanks

 

[k0ua]

I could not get the link to work.

James K0UA

 

[bp fick]

That's top drawer stuff. You did well.

 

[k0ua]

That's top drawer stuff. You did well.

Did you get the link to work?

 

[RJJR]

I could not get the link to work.

James K0UA

http://www.use-enco.com/CGI/INSRHM

Trying again. Part number 891-2499. I had to join their mailing list and they sent a coupon for 10 percent off and free shipping. Might should have gotten 30 gallons instead of 15. Hope it helps someone.

 

[k0ua]

Enco - Guaranteed Lowest Prices on Machinery, Tools and Shop Supplies

Trying again. Part number 891-2499. I had to join their mailing list and they sent a coupon for 10 percent off and free shipping. Might should have gotten 30 gallons instead of 15. Hope it helps someone.

Thanks, I am still trying to decide what to get and where to get it.. and the hours keep racking up

James K0UA

 

[Kioti Tom]

Exxon Mobil fluid 424 is one of the approved fluids for my tractor. It is on the decal on my fender. Attached is a link to a thread I did showing alternates.
http://www.tractorbynet.com/forums/kioti-owning-operating/232481-hydraulic-oils.html

Tom

 

[RJJR]

Thanks, I am still trying to decide what to get and where to get it.. and the hours keep racking up

James K0UA

Let us know what you find. I couldn't find the shell spirax or the BP product. Walmart showed Spirax in stock and was cross referenced to a Rotella product when I got there.
Good luck.

 

[CJONE]

I'm getting ready for the 50 hour service and was having a hard time finding any of the hydro oils listed in my manual. So, I found the Exxon Mobilefluid 424 at www.use.enco.com for $38 per 2 1/2 gallon jug and free shipping to my door in case someone else is in a similar situation. I know this isn't dirt cheap but I couldn't find any locally and I think it's good oil.
Thanks

That is the same oil I am running and it is a good price. I paid $70 per 5 gallon bucket. CJ

 

[Coyote machine]

That is the same oil I am running and it is a good price. I paid $70 per 5 gallon bucket. CJ

Where did you get yours for $70/5gallons? At site listed at beginning of thread it's $94/5gal:confused2:

 

[RJJR]

Where did you get yours for $70/5gallons? At site listed at beginning of thread it's $94/5gal:confused2:

CM,
They've been sending me promotional coupons for 10% off and free shipping every week or so since I joined. Just had to register, get a password and I requested a catalog. You get your first coupon in the catalog.
RJ

 

[kraftykeltic]

The green printed buckets at Sam's club about 42 dollars now. that's 5 gallons

 

[CJONE]

Where did you get yours for $70/5gallons? At site listed at beginning of thread it's $94/5gal:confused2:

From our oil supplier, I am sure it helps that we spend 40-50k a year with them. I'll p/m you the info. CJ

 

[krazsk]

Wal mart here has the Shell Spirax /md for $65/5gal. The label on it says previously named Donax TD. After the warranty is up, it will be Tractor Supply Universal Tractor trans/hydraulic Fluid. $45/5 gal.

 

[VictorW]

I wished Walmart near me sold Shell Spirax for $65/5gal. I have to get it from an oil supplier and they want $75. It's always worked well in my tractor whether Summer or Winter.

 

[k0ua]

Let us know what you find. I couldn't find the shell spirax or the BP product. Walmart showed Spirax in stock and was cross referenced to a Rotella product when I got there.
Good luck.

I went ahead and purchased 15 gallons of the Mobil Fluid 424 (5 gallon buckets) from a local oil company for $72 per 5 gallons including paying the local tax. $66 and some change per bucket retail.
The way I am going working on a project it will be ready for the change in about another week or so. I have 31 hours now, with a lot more to do.

James K0UA