Hydraulic Steering Failing

   / Hydraulic Steering Failing #1  

Believer

Silver Member
Joined
Aug 17, 2008
Messages
164
I've got a Yanmar compact loader backhoe, a CBL 40. Has 430 hours on it. The steering is failing....turn the wheel but its moving very little, worse one direction than the other. Came about gradually. I've put some heavy loads on this tractor. I'm guessing I need to rebuild the steering cylinder but wanted to seek advice or troubleshooting tips beforehand. Are ther other possible causes? Everything else on tractor works fine.
 
   / Hydraulic Steering Failing #2  
If you raise the front wheels off the ground do they steer correctly?

First thought is the seals in the steering cylinder leaking. Depending on how bad they are will they turn if you physically push on the front tires with them raised ? If they turn then I would definitely suspect bad seals on the cylinder
 

Tractor & Equipment Auctions

RCcar RC-G2.0 Electric Golf Cart, New! (A52384)
RCcar RC-G2.0...
(3) 445/5022.5 TIRES (A51248)
(3) 445/5022.5...
Two Post Car Lift (A50120)
Two Post Car Lift...
2025 IR UNUSED Cleanout Bucket (A53117)
2025 IR UNUSED...
UNUSED CFG INDUSTRIAL H15R EXCAVATOR (A51247)
UNUSED CFG...
UNUSED LANHERO LDH-T460 STAND ON SKID STEER (A51247)
UNUSED LANHERO...
 
Top