BLES
Member
I don't have a dealer nearby. Anyone KNOW what oil is in a 2013 hydraulic system so I can get some locally?
Thanks.
BLES
Thanks.
BLES
Hydraulic oil??
- Thread starter BLES
- Start date
- Views: 7126
JDAOWNER
Silver Member
CHECK YOUR OWNERS MANUEL--IT SHOULD GIVE YOU A SPEC. #. IF YOU DON'T HAVE A BOOK, LOOK IT UP ON LINE.
- Joined
- Dec 31, 2011
- Messages
- 10,716
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
My G series manual: other than the three Bobcat branded hydraulic fluids, the specs are 4C to 49C+...VG100; minimum VI 130. For -40C to 27C, VG46; minimum VI 150
I once looked up what oil Mobil had that would match those specs....Mobil DTE 10 Excel 46 VI 164
Not cheap oil though....I bought the Bobcat brand because the price wasn't bad and I can get it down the road.
I once looked up what oil Mobil had that would match those specs....Mobil DTE 10 Excel 46 VI 164
Not cheap oil though....I bought the Bobcat brand because the price wasn't bad and I can get it down the road.
Last edited:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,893
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Are you just needing to add some?
Make sure the boom is down and the bucket is curled up when checking the level.
- Joined
- Dec 31, 2011
- Messages
- 10,716
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
What do you have locally? Just a cheap yellow label hydraulic fluid may work for a old tractor but should not be in a skidsteer type system.:2cents:
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,893
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
In the Versahandler I use 10W-40 motor oil, because of this reference in the service manual:
The hydraulic fluid part number 6903117 is the same for Toolcat:
The hydraulic fluid part number 6903117 is the same for Toolcat:
ShanClan
New member
- Joined
- Apr 7, 2020
- Messages
- 11
- Location
- Florence, AL
- Tractor
- Toolcat 5600 G; Kubota KX161-3; Ditch Witch 5610
Xfaxman, great info. Thanks. I've been looking for a single fluid adequate for several uses.
Are you running synthetic?
Are you running synthetic?
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,893
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
No the Toolcat is new enough that it has not been changed.
