hydraulic hoses replacement

[Raw Bone]

Jinma 254 tractor with a 140 Koyker FEL . I need to replace the hydraulic hose that has two different size threaded hose ends . Hose coming from pump going to FEL quick disconnect hose connector , what thread sizes ??? The problem is that there is 3 - 4 different types of fittings NPT, JIC , etc.
I went to my local TSC store and all of their pre-made hoses had the same size fittings on both ends. I really didn't want to have to have a hose made up. I was hoping to buy one off the shelf .

 

[grsthegreat]

Jinma 254 tractor , 140 Koyker FEL need to replace hydraulic hoses with different size hose ends . Hose coming from pump going to FEL quick disconnect hose connector , what thread sizes ???

Easiest way is to go to any hydraulic shop or tractor sales/service shop and bring hose with you. Alot of ends have to be physically matched. Especially of there are 90s fittings. These have to match bends exactly.

 

[kthompson]

I read you need threads different than on your current hose. Regardless take the fitting you are trying to match with you. You might be able to find an adapter.

 

[/pine]

https://www.discounthydraulichose.com/mm5/thread_guide.pdf