Hydraulic connectors for 402 FEL

[GregWatkins]

I broke one of the hydraulic connectors (the blue one BTW) on the control valve assmbly of my FEL yesterday. It is where the blue hose connects to the control assembly. The hydraulic connector on top of the threaded connector is what broke. (It got bent and has a hole in it and the hydraulic fluid shoots out when I try to use the FEL.) Is this a "standard" part that may be available from somewhere other then a KUBOTA dealer? If so, I "assume" I can take it to a local place to get a replacement. (closer dealer is about 25 miles from me and I am SURE it will not be cheap :~>) The threaded part is not damaged, just the top where the hose attaches to it.

Any suggestions???

Thanks,

greg

 

[kubmech]

Greg, Meyers snow plow couplers work good as replacements, though you have to replace them as a set.

 

[snowman]

Whan I had a fitting split open on one of my hoses, I just took the hose off, took it to a local truck shop, and they fabricated a whole new hose. Cost was about $15 I think.