Hyd. Top Link - $150

[markcg2000]

I hooked up to the 1&2 FEL ports. The SCV setup came with the tractor, but I didn't get an FEL (long story) I HOPE to get the FEL some day... till then I may as well use the existing setup /w3tcompact/icons/smile.gif. If/when I get the FEL, I'll spring for the electrically controlled divertor valve, rather than another SCV setup. I don't like seeing all that hardware mounted on the fenders/ROPS/ wherever. I keep seeing myself smacking my elbow on it /w3tcompact/icons/sad.gif.

I'm at work /w3tcompact/icons/shocked.gif, but I'll get a picture of the hook-up tonight.

 

[gordon]

Cats huh, well my youngest sure likes them. She also knows that she isn't supposed to play on the tractor as well but u know how that goes, sometimes you gotta bend the rules. /w3tcompact/icons/smile.gif

Gordon

 

[markcg2000]

Ahhhh! Paw prints/w3tcompact/icons/shocked.gif /w3tcompact/icons/laugh.gif !!

 

[markcg2000]

picture of the connection of the hoses. They hang down a bit; I'll need to do something about that this spring, but they're fine for snow-blowing.

 

[Thomas]

gordon,
I think you found another use for a tractor. /w3tcompact/icons/wink.gif
Just something about children and pets that gives a wam feeling w/in. /w3tcompact/icons/love.gif

 

[RobS]

Mark, your picture didn't make it. Are you hooking in where the FEL normally connects (under the front of the floorboard)? Anxious to see /w3tcompact/icons/smile.gif

 

[markcg2000]

Sorry about that... missed the fact that it didn't show. [image]/w3tcompact/icons/hmm.gif[/image] But, yes, I'm simply hooking right into the FEL ports.
This picture shows them hanfing down more than they do now. I pulled some of the slack back to the cylinder, them tied them.

 

[HalseyGreen]

With your hoses and quick connects you have duplicated what John Deere offers as another rear remote option for the JD790. The only differents is that they use 2 90 degree elbows (you only used 1) coming off the quick connect to get the hoses up under the tractor. Looks good and a inexpensive way to get TNT. I went the way of adding the rear auxiliary remote kit ($160) and then a 3 valve control, hoses and quick connects, and 3 cylinders to get mine.

 

[RobS]

A picture does say a thousand words, doesn't it! Makes all the sense in the world now. Sharp looking tractor you've got there also /w3tcompact/icons/smile.gif

 

[markcg2000]

<font color=blue>they use 2 90 degree elbows</font color=blue>

I like that idea. I've been wondering how to pull that up closer to the machine/w3tcompact/icons/cool.gif.

I remember talking to you before about how you did yours ($$$); that was a big part of the reason I went this route. Remember, though, I only got Top, no tilt.