swampyankee
New member
Can anyone tell me how to hook up a hyd. valve to run a grapple on the bucket. Can I just T off the bucket valve to an other valve to run the grapple? Thanks /forums/images/graemlins/confused.gif
Hyd. Questions for Grapple on 3510HST
- Thread starter swampyankee
- Start date
- Views: 716
wallace
Veteran Member, Approved Advertiser
You can run lines from you rear remote to the front.
If you are using your remotes already then you will have to take other measures such as a electronic third function or get a valve and tap into the plumbing on your loader valve.
If you are using your remotes already then you will have to take other measures such as a electronic third function or get a valve and tap into the plumbing on your loader valve.
Swanpyankee, You will be needing a 2 way, single spool valve with a power beyond sleeve. You will have to take your power off from the power beyond port on your loader valve. and then feed your 3 point hitch from the power beyond sleeve on your grapple valve. Being I am not real computer savy, give me a call at 585-343-0770 and I will go over it in detail with you. Please call me before you try to do this because you can do some very costly damage if it is hooked up wrong.
Galen LaWall
Your Mahindra Tractor Dealer
Batavia, NY
Galen LaWall
Your Mahindra Tractor Dealer
Batavia, NY
OP
swampyankee
New member
Thanks for the input. My dealer here in Maine has not hooked a grapple up before so I thought I would help him with some info. If you don't mind I will have him call you since he is going to do the work. He is about hyd. I made the grapple and was going to let him hook it up.
Thanks John Green
Thanks John Green
