Hyd filter housing 3510

[Jeffery8mm]

Got on a stump yesterday. I am in need of the part that the hydro filter screws to. How much is this mistake gonna set me back???
I assume this is gonna be a dealer item??
Also, has anyone been able to cross reference the OEM hyd filter to a Wix??
Thanks
Jeff

 

[manganos]

Ouch. Dunno how much it is gonna run you but I'd go to wallacetractor.com and see if they have it in stock. I think Mike works in the shop and could probably tell you what you need.

 

[thomass38]

the 3510 should have the same filter as my 2810. NAPA should have it in their listings. Donaldson #169078 Napa# 1586. The NAPA actually is made by Donaldson. Hope the stump did not do much damage. GOOD LUCK

 

[Jeffery8mm]

Looks like the filter housing is gonna tear up a Ben Franklin. Not as bad as I had thought!!
Jeff

 

[Keith_B]

My 4110 has one of those huge canisters and filters under the tractor. I'm considering checking into some type of spin on filter conversion the next time I need to change the filter. The rubber hoses on each end of the canister tend to break down.

 

[LAWALLSTRACTOR]

The later 4110's used the same spin on filters as the 3510's.