I own a 2638 and Lately when I'm operating the tractor moving forward will creep when I let off of the peddle. I have greased the zerks that I have found, and I have shot wd40 onto the other joints. Still doing it, any ideas as to what to try next ?
CloverKnollFarms
Super Member
Should be able to adjust the neutral position under the floorboard
duffer
Veteran Member
Mine has done that since the day I bought it in 2016. Usually, it's because the hyd oil is not warmed up yet. (but not always). I usually just tap the other pedal lightly to get it to a neutral position. Greasing hasn't helped in my case, but it certainly doesn't hurt to do it.
I have the 2538 also, and it creeps the same. I also hit the other pedal to get it to neutral, and it stops, but in a few seconds it will start creeping again. Also the FEL control seems jumpy. Maybe it's just me, but wondered if The hydraulic filter might cause some of this? Again thanks in advance for he help
So I adjusted the brakes today to the lowest setting for max brakes, they work great, but tractor still wants to creep even with the brakes in the park mode. Is there any way to adjust the forward/reverse pedals externally? I do tap the reverse pedal and that does stop the creep for a bit and then it creeps again. The air is starting to be blue again. Thanks for any input in advance. I guess I'm not sure what I'm looking for under the floorboard, maybe you could give us some clues, Maybe I'm just over thinking the whole thing
CloverKnollFarms
Super Member
I don't know about other brands, but TYM has an easy external adjustment for fwd and reverse centering
