howard hermman
New member
how do i change a fan belt on a 7753 bob cat
howard
- Thread starter howard hermman
- Start date
- Views: 975
SSdoxie
Elite Member
The fan blet runs off the hydrostatic pump pulley to the fand drive gear box. It has a spring loaded idler. Raise the cab to get access, then pull the idler/tension pully towards you to loosen belt. Slip the belt off both pump and gear box pulleys. Take the bolt out of the idler pulley to get blet out from under the retainer guide to replace it. Also replace the bushing inside that pulley while you're in there.