How to trace a leak, Kymron ZX22

[2manyrocks]

I think there are getting to be enough owners of chinese minis on TBN that they should have their own forum on TBN. Maybe not enough owners to have brand specific forums yet, but a general forum?

 

[Jrasband]

Yeah I think it is a good idea. I would much rather talk on here then Facebook! Also, the Facebook for Kymron is run by one of the Kymron dealers and you can only talk Kymron and only positive...

 

[Jrasband]

Update. I used the machine for a hour after fixing the hydraulic leak, the next morning I went out to feel for oil. Now the machine is leaking diesel from the tank, turns out the tank is prone to cracking the dealer said. I told the dealer I am not surprised at all because the tank is only mounted on the bottom. When I drive on a gravel road in high speed the tank shakes back and forth, prob a inch each direction! Turns out the tank is not covered under warranty.... New machine 150 hours!

So I have to fix another leak and fabricate something so the tank is more supported.

 

[Mike1955]

I pressurize mine with air once. Then used soap in a spray gun. Very effective although difficult to set up