How to rig an X595 to mow in reverse

   / How to rig an X595 to mow in reverse #131  
There are plenty of places in the internet that show you exactly how to do it. I disabled mine at the connector at the back of the PTO switch on the dash. Took about 5 minutes to do. But be warned, if you take it in for service the Deere dealer I bought mine at said that Deere makes them test the safety circuits and repair them. I don't know if it's true or not but it would suck if the dealer tried to charge you for "fixing" the modification. As long as they have your tractor they don't have to release it until it's paid for or you go to court.

That where mine is disabled too, the jumper wire used has a fuse (inline) Remove the fuse and operation returns to normal.
 
   / How to rig an X595 to mow in reverse #132  
The dealer has liability if they don't fix the safety features.. and will charge for doing the work.

Just put it back to original before taking it back in for dealer work.

I disabled my RIO an hour after I got it. I've been back dealer twice for new radiators. I mentioned the RIO bypass to them and they said they don't care what I do to my machine.
 
   / How to rig an X595 to mow in reverse #133  
All dealers are not the same.. still could have the liability.. just choose to ignore it as we prolly all should. (and put a lid on the lawyers who feed off the victims)
 

Tractor & Equipment Auctions

2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A49461)
2021 Ver-Mac...
2006 CATERPILLAR 330DL EXCAVATOR (A51242)
2006 CATERPILLAR...
WHITE CI-7 DRAW WORKS POWERED BY TWIN DETROIT 12.7S (A50854)
WHITE CI-7 DRAW...
JOHN DEERE 975 3 BOTTOM SWITCH PLOW (A51243)
JOHN DEERE 975 3...
2019 CATERPILLAR 308 CR EXCAVATOR (A50458)
2019 CATERPILLAR...
2018 WACKER NEUSON CORPORATION DBA WACKER NEUSON LTV6 LIGHT TOWER (A50854)
2018 WACKER NEUSON...
 
Top