How to mount chainsaw on CK35HST

[kurtsligh]

I'm about to get a CK35hst and wondered if anyone had a good idea on how to mount a chainsaw to it. I had a DK55 and there didn't seem to be a good place for one there, so it just rattled behind the seat. I haven't taken possession yet, but the chainsaw mount is something I'd like figured out as quick as I can.

 

[kirkawilson]

I mounted one of these to my ROPS to carry my chainsaw....works fine.

Maddog ATV Chainsaw Holder Carrier | eBay

 

[ovrszd]

Not familiar with the tractor so space might be different. Here's one I built and used on my previous L4400 Kubota and now on the M9540.







Here's a chainsaw tote box I built that attaches to my QH. Not sure if you can use something like this.

 

[oldpilgrim]

here's how I did it. Your ROPS may/may not allow it.

http://www.tractorbynet.com/forums/...mes-simplest-things-work-best.html?highlight=

 

[worthb]

I am working on one now for my CK35 hst. I will post pics when I get it closer to done. It will mount to the left floorboard, just in front of the clutch pedal.

 

[Illini22]

Here's mine

 

[dfkrug]

On my CK30, I integrated a carry-all box into enhanced hood protection. I use it to
carry one or 2 chainsaws, chain, loppers, hatchet, helmet, etc. All at once. The
frame is hinged at the front to easily tip it up for fueling. My axe is held by a
separate gun rack. Usually, I have an elastic cargo mesh over it all.

 

[kco]

Here is the one for my DK35 SE. I got the ideas from TBN.

 

[kurtsligh]

On my CK30, I integrated a carry-all box into enhanced hood protection. I use it to
carry one or 2 chainsaws, chain, loppers, hatchet, helmet, etc. All at once. The
frame is hinged at the front to easily tip it up for fueling. My axe is held by a
separate gun rack. Usually, I have an elastic cargo mesh over it all.

I could probably use that enhanced hood protection, I did some major damage to my dk55 hood one time :confused2:

 

[kurtsligh]

These are all good ideas that will save me some time.