How to get a Bobcat SG60 Stump grinder to work on an ASV?

tuckinlugz · Nov 23, 2009

I have a bobcat brand SG60 stump grinder that I want to use on a ASV RC100. The electrical connector is different. Does anyone know where I can buy the male end of the electrical quick attachment so I can rewire it to work on the ASV? Or does anyone make an adaptor? Thanks!

ClearViewGroup · Nov 23, 2009

go to the asv (or cat) dealer and get the implement side harness and wire it up...they are not cheap however~!

tuckinlugz · Nov 23, 2009

I called them and they were clueless. They said they had a square connector and mine is round.

Robbie Hegwood · Nov 23, 2009

If I can remember I will call a dealership I use alot and see what they say. With as amny different manufacturers they have to make an adapter. I'll let you know. Did you call Beard?

tuckinlugz · Nov 23, 2009

Yes I called Beard and they said that they would look into it in the morning. I found some more info on another thread...... Please look and post on this thread in the attachment section. http://www.tractorbynet.com/forums/attachments/158047-how-wire-bobcat-stump-grinder.html

tuckinlugz · Dec 7, 2009

Thanks everyone for your help. I think today finally after a couple weeks of time and research I figured it out. Thanks Dennis from Wisconsin was the guy with the knowledge! Bobcat makes an adaptor that goes from the attachment and converts to a 14 pin connector. For my Stump grinder the SG60 it's part number 6725383 $292.83 and for the snow blower (not sure which model) it's part number 6728165 $194.77. And then you plug the 14 pin adaptor into another adapter that will plug into the Cat Asv 8 pin plug. It's part number 714648 $230. So I thought I would post it up and the next one of you that needs the info won't have to waste all the time I did trying to figure it out. My local Bobcat dealer was clueless. Bobcat of Green Bay knows their stuff! Merry Christmas!