how many shims behind the motor pulley

   / how many shims behind the motor pulley #1  

heehaw

Veteran Member
Joined
Sep 15, 2000
Messages
2,076
Location
russellville, arkansas
Tractor
Kubota M4900, B7510 and RTV
those of you that have replaced the motor on your troybilt tillers: do you remember how many shims you had to put behind the motor pulley?
heehaw
 
   / how many shims behind the motor pulley #2  
You need to shim to line up the upper and lower pulley V grooves, it varies from engine to engine. Try the amount you had from the old engine and work from there. A short piece of steel rod or tube in the v will help you to see if it ligns up correctly.
 

Tractor & Equipment Auctions

UNUSED SDLANCH SDLL30 STAND ON SKID STEER (A54756)
UNUSED SDLANCH...
2012 JOHN DEERE 13-INCH REAR WHEEL SPACER FOR 10 BOLT HUB (A55301)
2012 JOHN DEERE...
2014 GENIE GS4069DC ROUGH TERRAIN SCISSOR LIFT (A52705)
2014 GENIE...
UNUSED LANDHONOR 82" FORK EXTENSIONS (A54757)
UNUSED LANDHONOR...
2018 CATERPILLAR 259D SKID STEER (A52705)
2018 CATERPILLAR...
UNUSED CFG INDUSTRIAL MX15RX EXCAVATOR (A52706)
UNUSED CFG...
 
Top