how many shims behind the motor pulley

   / how many shims behind the motor pulley #1  

heehaw

Veteran Member
Joined
Sep 15, 2000
Messages
2,076
Location
russellville, arkansas
Tractor
Kubota M4900, B7510 and RTV
those of you that have replaced the motor on your troybilt tillers: do you remember how many shims you had to put behind the motor pulley?
heehaw
 
   / how many shims behind the motor pulley #2  
You need to shim to line up the upper and lower pulley V grooves, it varies from engine to engine. Try the amount you had from the old engine and work from there. A short piece of steel rod or tube in the v will help you to see if it ligns up correctly.
 

Tractor & Equipment Auctions

TAKEUCHI TB250-2 EXCAVATOR (A52705)
TAKEUCHI TB250-2...
2025 Swict 72in Bucket Skid Steer Attachment (A55787)
2025 Swict 72in...
UNUSED IRANCH 16" EXCAVATOR RAKE (A54757)
UNUSED IRANCH 16"...
2013 John Deere 650K LGP (A47477)
2013 John Deere...
2018 JLG 2632ES 26ft Electric Scissor Lift (A53421)
2018 JLG 2632ES...
2012 JOHN DEERE 10-INCH REAR WHEEL SPACER FOR 10 BOLT HUB (A55301)
2012 JOHN DEERE...
 
Top