How long is a 3720 with a front blower?

[WaltonM]

Yes I could detach the loader and install the blower, but that would be a much bigger challenge than hopefully finding someone with one already set up out in there garage.
I really need the info as I'm renovating an old building and it may turn out to be a few inches too short.
Info would be greatly appreciated.

 

[texasranger556]

Probably will get more replies come November or December. If I was you I'd measure your blower to the mounting pin(s) then measure your tractor from the mounting pins back to the 3 point hitch arms. Add them up and you'd be pretty darn close.

 

[Spindifferent]

Yes I could detach the loader and install the blower, but that would be a much bigger challenge than hopefully finding someone with one already set up out in there garage.

While I don't have a blower, (I'm in Texas!) I think it would help if you noted exactly which blower you need info about. I imagine that there are many brands and models of snow blowers on the market.

BTW - I really enjoy Ontario! I've been to Toronto, Niagara Falls, and Peterborough several times for work. Great people!

 

[turbo36]

From the front of the Blower to the back of the 3 point arms is 160".
If you take off the arms the OAL is about 150"