How do you remove the joy stick from the housing on a JD 5300?

   / How do you remove the joy stick from the housing on a JD 5300? #1  

unifi

New member
Joined
Apr 22, 2014
Messages
1
Location
Madison, NC
Tractor
JD 5300
I have a JD5300 and housing on the Joystick has broken so I ordered a new one for JD but I can't figure out how to get the joystick off so I can replace the old housing. Any help will be appreciated.

Unifi
 
   / How do you remove the joy stick from the housing on a JD 5300? #2  
Welcome to the forum.
According to the tech manual
early models
1 remove right wheel & fender
2 remove right hand control console
3 remove shield (P) the broken part?
4 lift boot to access square hole. use suitable tool to push rod B) to relieve tension on E-clip. Remove e-clip
later models
1 remove right wheel & fender
2 remove right hand control console
3 remove shields c&l
 
   / How do you remove the joy stick from the housing on a JD 5300? #3  
I looked at my machine. Depending on your wheel clearance, you may be able to remove the right fender without removing the wheel. Looks like Removing the right fender is required to access the screws holding the housing together.
 

Tractor & Equipment Auctions

2017 Yamaha VX1050B Deluxe Jetski (A50324)
2017 Yamaha...
Blue-Jet Liquid Fertilizer Applicator (A51039)
Blue-Jet Liquid...
Adams 8 Ton Weigh Hopper (A51039)
Adams 8 Ton Weigh...
2017 FREIGHTLINER CASCADIA 126 SLEEPER TRUCK (A51222)
2017 FREIGHTLINER...
Craftsman YTS 3000 42in. Riding Mower (A49346)
Craftsman YTS 3000...
2011 TRAIL KING LOWBOY TRAILER (A50459)
2011 TRAIL KING...
 
Top