Mar 17, 2010 / HOOKING UP A PISTON TO CAT1 #1 S spo307 Gold Member Joined Oct 2, 2007 Messages 446 Location Levittown & Long Eddy NY Tractor kubota L4400 When I install the piston on the upper link of my 3 pt, can anyone help me with the procedure, purge, fill hoses etc. thanks
When I install the piston on the upper link of my 3 pt, can anyone help me with the procedure, purge, fill hoses etc. thanks
Mar 17, 2010 / HOOKING UP A PISTON TO CAT1 #2 kennyd Advertiser Joined Jul 6, 2003 Messages 13,812 Location Westminster, MD Tractor John Deere 3720 CAB/TLB, JD455 Just move the lever to operate the cylinder from lock-to-lock a few times, the system is self-purging. No need to "bleed" anything.
Just move the lever to operate the cylinder from lock-to-lock a few times, the system is self-purging. No need to "bleed" anything.
Mar 17, 2010 / HOOKING UP A PISTON TO CAT1 Thread Starter #3 OP S spo307 Gold Member Joined Oct 2, 2007 Messages 446 Location Levittown & Long Eddy NY Tractor kubota L4400 ok thanks, wasnt sure if I had to prime the hose
Mar 18, 2010 / HOOKING UP A PISTON TO CAT1 #4 R rambler Veteran Member Joined Jul 6, 2003 Messages 2,010 Location MN Tractor Ford 960, 7700, TW20, 1720; IHC H, 300; Ollie S77 It'll spit & jerk for a few trips back & forth, so keep everything away & no heavy load on it, just run it back & forth & it will work the air out by itself. --->Paul
It'll spit & jerk for a few trips back & forth, so keep everything away & no heavy load on it, just run it back & forth & it will work the air out by itself. --->Paul
Mar 18, 2010 / HOOKING UP A PISTON TO CAT1 Thread Starter #5 OP S spo307 Gold Member Joined Oct 2, 2007 Messages 446 Location Levittown & Long Eddy NY Tractor kubota L4400 ok thanks
