Hinomoto E2004 Tach Readin erratic over 1500 rpm?

   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
I have a e2004 hinomoto and the tach seems to work up to around 1500-2000 then it jumps up to 3000 looks to be new tach cable looks like the routing is a little rough not sure what it is..

has 250hrs. suggestions other than tach cable broke?
 
   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #2  
The outer cable housing may be kinked, cut or need lubricating.

Eugene
 
   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #3  
My tach cable was broke in my E2004 where the cable bends upward under the dash. I bought a new one at Napa, and I have the part number in my files if you need to buy a new one.
 
   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #4  
I would like to have the part number.

Eugene
 
   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #5  
Eugene,

The hour meter cable is Napa part number 615-1796 ($9). That is a universal speedometer cable with the properly sized square end to fit the hour gauge. Cut the cable to length and crimp on the proper piece for the engine side of the cable. Napa could also order the crimp on piece. I reused the old crimp on piece to save making another trip to Napa.
 
   / Hinomoto E2004 Tach Readin erratic over 1500 rpm? #6  
I've used the NAPA universal cable on a grey market MF130. I didn't even look for a part number. I need one for my E2304. Thanks.

Eugene
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2011 Ford F-350 Service Truck (A51692)
2011 Ford F-350...
GREENLEE 555C ELECTRIC CONDUIT BENDER (A51247)
GREENLEE 555C...
(INOP) EZGO ELECTRIC GOLFCART (A51248)
(INOP) EZGO...
2011 John Deere 4520 Front Loader Utility Tractor (A51691)
2011 John Deere...
Case SV185 Compact Wheel Loader Skid Steer (A51691)
Case SV185 Compact...
 
Top