Help!

[larsonethan]

Need help figuring out how to pull apart front hydrologic suspension piston on a JD 8320. Piston part # RE 186113. Got it off the tractor but havent seen one like this before because there is no exterior snap ring so im lost other than beat it apart. TIA

 

[larsonethan]

Need help figuring out how to pull apart front hydrologic suspension piston on a JD 8320. Piston part # RE 186113. Got it off the tractor but havent seen one like this before because there is no exterior snap ring so im lost other than beat it apart. TIA

 

[MORRISONSTEEL]

View attachment 20170531132142086.pdf

 

[larsonethan]

Cant view

 

[MORRISONSTEEL]

Sorry, up side down ;(

 

[larsonethan]

No the picture wont load on my end

 

[jd110]

The guide threads into the barrel. A spanner wrench that engages the coles in the guide is required to disassemble without damage. Also you will need some heat on threaded area to break loose the Loctite that is used when assembled.

 

[larsonethan]

Thank you

 

[Plantation Paul]

Sometimes you can break them loose with a pipe wrench. Looks like it already has marks from one.

 

[larsonethan]

Yeah i tried a pipe wrench but i got it done now thanks to jd110