Help with log splitter on M6800

   / Help with log splitter on M6800 #1  

BSawyer

Member
Joined
Oct 1, 2004
Messages
26
Location
Stockbridge, GA
Tractor
Kubota M6800 4wd HDF
I picked up a used log splitter last year and thanks to advice found here, got the right connectors to hook up to my M6800, flushed the old fluid and split a bit of wood last year.

The way I would use it was to take the hyd. lever control on the tractor and push or pull it one way or the other until it locked into place.

Then I would move back to the splitter and use the control lever on it to expand or retract the cylinder to split the wood.

The only bad thing was that when I expanded the cylinder too far or retracted it all the way, the splitter cylinder would quit moving and the pump seemed to make a different noise. The only way I could get it to reset was to move the hyd lever on the M6800 thru it's positions and then lock it back down. Then at that point I could resume splitting.

Any body have any ideas what is wrong? I don't know if the problem lies in the log splitter hydraulics or maybe there is a over-pressure relief valve on the M6800 that needs adjustment. I'm not strong in hydraulics workings...

Let me know if you need any more details.

http://img.photobucket.com/albums/v469/bowfan/TractorStuff/splitter.jpg
 
 

Tractor & Equipment Auctions

1981 CASE 580D BACKHOE (A51242)
1981 CASE 580D...
2015 Chevrolet Tahoe SUV (A49461)
2015 Chevrolet...
2013 FREIGHTLINER CASCADIA (A50854)
2013 FREIGHTLINER...
1270 (A50490)
1270 (A50490)
1995 KOMATSU WA320-1 WHEEL LOADER (A51242)
1995 KOMATSU...
BREWSTER DRAWWORKS WITH TWIN CATERPILLAR ENGINES (A50854)
BREWSTER DRAWWORKS...
 
Top