Help IDing Pump

[cruzer]

Supposedly it's from a Plow setup off a Jeep bought at a Farm Fleet store 10yrs ago. The only markings on it are a "G" on the back. Anybody have an idea what it is or were i could find out? Specs?

Thanks

Stew

 

[wdchyd]

Commercial gear pump..(now Parker)...Any numbers on the flange?

 

[cruzer]

Commercial gear pump..(now Parker)...Any numbers on the flange?

Not sure. Just got it cheap on eBay but the guy didn't know anything about it. Other than what I listed above. Will see when I get it in a few days.

Cruzer

 

[wdchyd]

If it's from a plow setup then the pump may only be about 4-8 gpms.....there is a way to measure the gear set internally to approx the CID, then you could calculate with the prime mover rpm's to give you gpm's

 

[wdchyd]

Replacing a Gear Pump

 

[cruzer]

Thanks, for the info. 4-5gpm would be perfect, even 2-3 will work ok for my size cylinders(1.5in). Will have to use the calculator if cant find out any other info on it.

Cruzer

 

[cruzer]

Guess the guy couldn't see this info on the pump. I found the info on the Parker site. Looks like a 5gpm pump at 3k RPM!!! Which is perfect for the other random eBay purchase two spool valve I bought last year!!!

 

[wdchyd]

Nice Cruzer.....Looking forward to more pix on the project..:thumbsup: