Hay spear question?

   / Hay spear question? #1  

houser52

Gold Member
Joined
Jun 28, 2015
Messages
480
Location
Cherryville, NC
Tractor
Kubota M7060HD, Kubota L3600
I'm getting a new tractor next week and will need a new quick attach hay spear to move round hay bales. My old tractor has a spear that is a pin on type so I can't use it on my new tractor with the SSQA. That leaves me with having to get a new spear.

My old tractor had 1 long spear and 2 short stabilizers and that's all I've ever used. I have seen the ones with 2 long spears but not used them.

My question is... which type spear do you guys like the best, 1 long spear with 2 shorter stabilizers or 2 long spears? Does one stab the round bales easier than the other?
 
   / Hay spear question? #2  
I always used one long and two short until I started handling square bales. Now I use two long and haven't went back to the single for quite sometime.. Do the bales you handle have hard or soft cores?
 
   / Hay spear question? #3  
My rear, 3 point mounted spear is a single spear and two small stabilizers. If I don't get the spear fairly centered, it does move on me while driving. MY quick attach, front loader has two spears. I like it better. Very stable, it doesn't matter whey I hit the bale, it never moves while getting it out to the pasture. I also like that I can pick up my hay ring with it and place it over the bale. I guess a singe would do that to, but I don't really know for sure.
 
   / Hay spear question?
  • Thread Starter
#4  
Thanks for the opinions.

My bales are pretty solid and the single spear has no problem penetrating the core. When stacked, the bottom bales don't smash much.
 
   / Hay spear question? #5  
The easiest thing to do is get a ssqa plate and weld it on your old spear where the pin on part is unless you want to still use it
 
   / Hay spear question?
  • Thread Starter
#6  
The easiest thing to do is get a ssqa plate and weld it on your old spear where the pin on part is unless you want to still use it

I would do that but the spear is being traded in with the old tractor.
 
   / Hay spear question? #7  
On my 1st Kubota FEL I had a single spear then my latest Kubota has 2 spears. I like the 2 spears much better than the 1 spear.
 
   / Hay spear question?
  • Thread Starter
#8  
On my 1st Kubota FEL I had a single spear then my latest Kubota has 2 spears. I like the 2 spears much better than the 1 spear.

Thanks a lot. Any particular reason that you like the 2 spears better?
 
   / Hay spear question? #10  
My Brother has a thick round 3pt hitch spear with two stabelizers. I used to borrow it and his tractor as well. When I bought my own tractor I got a double square spear.
The smaller double spears seem to penetrate the bales better. If i have to move more than five bales with my brother's tractor I prefer to switch his single spear for my double. I use the forks on the loader to move an additional bale and would much prefer using a double spear there too.
 
Last edited:

Tractor & Equipment Auctions

HOMEADE 96" X 20' FLATBED TRAILER (A51243)
HOMEADE 96" X 20'...
2001 John Deere 670C Motor Grader (RIDE AND DRIVE) (VERY NICE) (A50774)
2001 John Deere...
2020 CATERPILLAR 315FL CR EXCAVATOR (A51242)
2020 CATERPILLAR...
2011 International WorkStar 7400 Chassis Truck, VIN # 1HTWGAAR6BJ325793 (A51572)
2011 International...
UNUSED AGT YSRT14 STAND ON SKID STEER (A51243)
UNUSED AGT YSRT14...
TAKEUCHI TL12V2 SKID STEER (A51242)
TAKEUCHI TL12V2...
 
Top