If any of you know what a harrow rake is maybe you might be able to answer my question. I want to buy a 4' harrow rake to pull behind my 21 hp horse power lawn tractor. The harrow can be turned in different directions to change the angle of the teeth to rake the ground. My tractor is a gasoline engine. I think it will have no problem, anyone disagree.
harrow rake
- Thread starter mechanic
- Start date
- Views: 1655
ArkCivEngr
Silver Member
- Joined
- Sep 23, 2004
- Messages
- 189
- Location
- Russellville, Arkansas
- Tractor
- Kubota L3400DT, John Deere X495
The rule I've seen before is that you need 1 hp for every 1' of harrow width. That doesn't seem exactly kosher, but I've never tested it, either.
I have a 6.5' harrow I bought off eBay, and I pull it with my X495. No problems. I could probably pull one twice that wide if I needed to. You should have no problems with your setup.
I have a 6.5' harrow I bought off eBay, and I pull it with my X495. No problems. I could probably pull one twice that wide if I needed to. You should have no problems with your setup.
Here are some similar links:
