Harbor Freight Tools that don't suck
- Thread starter Travelover
- Start date
- Views: 4094695
Diggin It
Super Star Member
Slow to the thread, but looking at the ad, most everything is back to the pre-mess pricing. They've changed their ad tactics a bit is all. The hot dog and pancake compressor are the new Hercules version and style, but the same price as the CP ones.
Not interested in the puck flashlights. The ones I have aren't all that great.
If I wasn't committed to so many other things, I'd be interested in the 12" sliding miter saw, but I just can't do it right now.
.
Not interested in the puck flashlights. The ones I have aren't all that great.
If I wasn't committed to so many other things, I'd be interested in the 12" sliding miter saw, but I just can't do it right now.
.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,930
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
A lot of things remain higher. The click torque wrench that was often $10 is now $16 with coupon, $25 without.
Mine is surprisingly accurate. It matches two beam-style ones every time I check it.
Mine is surprisingly accurate. It matches two beam-style ones every time I check it.
Hoodoo
Silver Member
- Joined
- Oct 8, 2021
- Messages
- 120
- Tractor
- Kioti CK2610
I just got back from HF, went to buy a new set of Metric sockets and a Crescent Wrench for my new tractor. I think their basic tools are solid and a good deal......
Oaktree
Super Member
The magnets are kinda weak, but otherwise they're OK. Free is good, but I already have enough to last me 10 years.
crazyal
Super Member
When I was building my house Lowes had a deal with Stanley. On the Stanley tape measure package was a coupon for a free tape measure (the silver 25' one) if you spent either $50 or $60 at Lowes. Having a store open until 10 while building a house meant I could work all day and then swing in and get what I needed for the next day. I was always dropping $60 bucks. I bet I have a dozen of them now.
HF should think about doing the same with one of their nicer tape measures. Not the Pittsburgh one but maybe the Bauer. Seeing tradesmen on a jobsite with Bauer tape measures would help make the brand feel more like a competitor to some of the other well known brands. If they are selling for $8 they must cost about $5 (or less) so a simple spend $60 and get a free tape measure (no other coupons combined) would be less than 10% off at HF cost. It's nothing to see people spending $100 plus when I walk into a HF store so the out of pocket cost for HF wouldn't be much.
No coupon needed, just have a bucket full of them at the register and a bell go off if they reach the minimum amount. Plus have a bunch of $1, $2, and $3 items so the person running the register can say "If you spend a couple dollars more you can get a free tape measure. It's a really nice tape measure." If they are good tape measures people will accept the brand name who otherwise see them as Chinese junk.
HF should think about doing the same with one of their nicer tape measures. Not the Pittsburgh one but maybe the Bauer. Seeing tradesmen on a jobsite with Bauer tape measures would help make the brand feel more like a competitor to some of the other well known brands. If they are selling for $8 they must cost about $5 (or less) so a simple spend $60 and get a free tape measure (no other coupons combined) would be less than 10% off at HF cost. It's nothing to see people spending $100 plus when I walk into a HF store so the out of pocket cost for HF wouldn't be much.
No coupon needed, just have a bucket full of them at the register and a bell go off if they reach the minimum amount. Plus have a bunch of $1, $2, and $3 items so the person running the register can say "If you spend a couple dollars more you can get a free tape measure. It's a really nice tape measure." If they are good tape measures people will accept the brand name who otherwise see them as Chinese junk.
neverfailyou
Silver Member
My HF multi-tool died yesterday. It was the single speed model, rattled/vibrated like it was going to fall apart in use, and would really heat up your hand if you used it for any length of time. I’ve had it for 4-5 years and it saw extensive DIY use.
I certainly got my $9.99 (or was it $19.99) minus 20% coupon worth of use. In fact I used it rather all the time while keeping my Fein model-with its fancy case- unused (which I paid several hundred dollars to purchase when multi tools where first on the market).
The tool was just good enough!
I certainly got my $9.99 (or was it $19.99) minus 20% coupon worth of use. In fact I used it rather all the time while keeping my Fein model-with its fancy case- unused (which I paid several hundred dollars to purchase when multi tools where first on the market).
The tool was just good enough!
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,986
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Did it stink like smoldering rice paper as it died? Landfill it and get a new one and hope it lasts longer (and don't stink in the end)...lol
OP
Travelover
Elite Member
That was the HF business model for 30+ years - just good enough. I hope they don't phase out their bottom end tools as they put a lot of tools in the hands of occasional DIYers that would never pop for a big brand name tool. I rarely use my HF multi tool, but when I do, it is exactly the right tool for the job and for the 15 or 20 bucks I paid for it, it has been an excellent value. And for those that demand made in Thailand Milwaukee quality, they have that choice.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,986
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Ah yes, Milwaukee is now a city in Thailand 
