GR 2120 deck will not lower fully

   / GR 2120 deck will not lower fully #1  

droy

Silver Member
Joined
Feb 12, 2004
Messages
222
Location
Southwest Louisiana
Tractor
NH Boomer 55, ZD1211
2012 GR 2120 48" deck
Yesterday afternoon wife began cutting grass for first time this season, noticed that deck not in normal lowered position, barely cutting the top of the grass. Came home last night, checked hydraulic raise / lower deck action appears to be normal, the round numbered deck height adjustment knob also working; did not measure but turning the knob does affect the height when the deck is lowered, but is still way too tall in the lowest height adjustment. Deck height was set after purchasing mower in 2012, and maybe adjusted a couple of times since then by me, but not recently. Linkage appears normal, nothing I can tell that would prevent the deck to lowering to its normal height. Did not measure the amount of movement when using the hydraulic raise / lower lever, nor the difference in height when moving the height adjustment knob from the low to high settings, guess that is next step, but if anyone would have suggestions, advice, on how to resolve this, I would appreciate this.
Thanks in advance.
 
   / GR 2120 deck will not lower fully
  • Thread Starter
#2  
Sorry for the duplicates, would admin please delete
 

Tractor & Equipment Auctions

2017 UTILITY VS2RA 53FT REEFER TRAILER (A51222)
2017 UTILITY VS2RA...
BW RVB3405 20,000lbs 5th Wheel Hitch Base (A50322)
BW RVB3405...
2016 CATERPILLAR CT660 TRI AXLE DUMP TRUCK (A51222)
2016 CATERPILLAR...
2020 INTERNATIONAL LONESTAR TANDEM AXLE SLEEPER (A51222)
2020 INTERNATIONAL...
2007 John Deere 1770NT CCS Planter (A50657)
2007 John Deere...
2010 John Deere Gator UTV (A49461)
2010 John Deere...
 
Top