jda1961
Gold Member
- Joined
- Jan 31, 2009
- Messages
- 260
- Location
- southeastern west virginia
- Tractor
- 1978 ford 3600, 1964 ford 4000 rowcrop
govenor
- Thread starter jda1961
- Start date
- Views: 1274
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
you can get an exploded diagram online from the parts section at CNH.. however.. to adjust the governor, you need a service manual.. either the aftermarket I&T fo-20, or the oem ford service manual. I'm surprised that since you own the tractor ( and a nice looking one at that ), and don't own the manuals needed to care for it. parts and service manuals will run you less than 100$.
PS.. what makes you think the governor is acting up? what's it doing?
Hunting? not picking up rpm upon load? over revving? no throttle response?
at least 2 of those have non governor related possible caused.. ie hunting can be fuel obstruction and sluggishness or lack of response can be flyweights in the dizzy advance.. etc..
soundguy
PS.. what makes you think the governor is acting up? what's it doing?
Hunting? not picking up rpm upon load? over revving? no throttle response?
at least 2 of those have non governor related possible caused.. ie hunting can be fuel obstruction and sluggishness or lack of response can be flyweights in the dizzy advance.. etc..
soundguy
Last edited:
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
PM me your email address if you want instructions from the service manual about your gov.
soundguy
soundguy
