OP
JTKub
Veteran Member
About $2300 for the TYM 54".
If you shop any similar SCUT, you'll find the 54" mid mount mowers to run from ~$2200-2600.
If you shop any similar SCUT, you'll find the 54" mid mount mowers to run from ~$2200-2600.
Torvy
Super Member
Warranty is through RK. Same with any companies who sell rebadged versions of another mfg.
They get parts directly from TYM, too.
I lean toward wanting stuff from the mfg direct. Of course we don't have RK out here. I also prefer the TYM engine over the Yanmar.
OP
JTKub
Veteran Member
So RK actually services their units right at the store? I did some poking around the RK forum and it appears so, although the threads are quite old over there.
The fella I spoke with from the RK store claimed RK has their own RK specific parts warehouse and parts distribution network. Not sure if that's true or not. The guy seemed fairly knowledgeable. Not TBN knowledgeable, but who is. LOL
I've never stepped foot in a RK store, but they sure were decent over the phone. They do have the best deal I could find (lowest cost) on RK/TYM tractors.
What's your take on Yanmar engines? I don't think I've ever heard anyone say a bad word about them.
Last edited:
tacticalturnip
Elite Member
Never a bad word about Yanmar engines, they're everywhere and these small simple ones- under 26 horsepower- are as simple as anything else on that horsepower range.
The one in my Deere 1025R was fairly quiet, easy to work on, and never gave me a hiccup. I just wanted a larger tractor.
The one in my Deere 1025R was fairly quiet, easy to work on, and never gave me a hiccup. I just wanted a larger tractor.
Torvy
Super Member
Nothing wrong with the Yanmar engines that isn't wrong with most of them in the Tier 4 market. They are so tied with electronics related to the emissions that more problems can arise.
The TYM engine is old-school and while it has a DPF, it will not go into limp mode if you have a regen issue. Easier to repair, too.
RK has its own warehouses, but they get the stock from TYM. You're adding another layer.
It sounded to me like RK service was a dice roll. Many of them don't have experienced mechanics. It's probably not unlike finding the right dealer on any brand.
The TYM engine is old-school and while it has a DPF, it will not go into limp mode if you have a regen issue. Easier to repair, too.
RK has its own warehouses, but they get the stock from TYM. You're adding another layer.
It sounded to me like RK service was a dice roll. Many of them don't have experienced mechanics. It's probably not unlike finding the right dealer on any brand.
tacticalturnip
Elite Member
This size tractor, fortunately, does not have a DPF.
OP
JTKub
Veteran Member
I think the only computerized thing on the T224 is the silly bluetooth speakers built in with the light pods on the ROPS.
Torvy
Super Member
I have that on my T574, too. I use it more than I expected. Not much use while mowing, but it was an upgrade they threw in at no additional charge.
OP
JTKub
Veteran Member
My area rep messaged me that a loader shipped from Rome GA yesterday. I would have much rather he put his hands on one, but here we are.. I was hoping he was going to drive to the dealer ~100 miles away from me to grab one off one of their machines. I have been chatting with that dealer and he mentioned TYM has a large parts warehouse in Bloomsburg PA. That's the first I've heard of that. This particular "platinum" dealer I've been chatting with has been more helpful than where I bought mine. I am not happy with where I purchased from. They couldn't have been better through the purchase process. Beyond that, I feel like they dropped the ball big time and should have had this resolved in a week or two. We're on week 6. Anyway.. Here's the N.East TYM hub I didn't know about..
group.tym.world
Designed for your world - TYM
TYM creates tractors that bring together alluring form, advanced function and accessible value. Through Korean expertise in design, engineering and manufacturing, the company helps owners overcome every obstacle as they shape the world around them.
group.tym.world
DynamicD
Bronze Member
For some reason I was thinking Bloomsburg location is just for assembling tractors, I did not realize parts had made it there yet.
If so that would be great!
If so that would be great!