Good morning!!!!

[Thomas]

Good morning Buppies,may you have relaxing and nice afternoon nap.

 

[buckeyefarmer]

8°. And heat not keeping up.
Pellet stove humming away, but downstairs unit reading 62°? Haven’t gotten out of blankets to investigate.
Upstairs thermostat says 64°, I manually turned on em heat. It should fire up automatically, not sure why it isn’t. Put electric heater in oldest son’s room and room his girlfriend is in.
Should get warmer today.
Calling for freezing rain tomorrow.

 

[Popgadget]

Good Morning
.9° this morning, and clear. At least it’s above 0. High of 25 predicted with snow tomorrow.

Yesterday I finished setting up the new welder and tested it out. I think I’m really going to like it, even from the try, it ran a great bead on some 3/8 hot rolled bar scraps, using the suggested settings. I gave my old MIG machine (Hobart 140) to my mechanical contractor buddy. It was a good machine but didn’t have enough power for anything over 3/16.

Oldest son brought his wife’s car up to change a headlight bulb in the heated shop after getting frustrated out in the cold. Turns out that the headlight assembly was an aftermarket (late model the he bought used with low mileage) and apparently had some collision damage. CARFAX is not a bad thing to check when buying used. At any rate the bulb did not reliably make contact with the assembly. Ended up removing it and reworking it to make it work. Actually there was nothing wrong with the original bulb.

Took the Carryall to the woodshed for another load of firewood, we are enjoying the fireplace. Definitely gonna have a fire today.

Did get to the hangar and got the little plane out, it looks pretty festive with lights and a wreath.

A nice view of the sunset on a clear evening.

It is an interesting learning curve with the radiant heat in a 6” slab. There is a lot of mass involved, and considerable hysteresis. The place is very tight and well insulated, so when the wife was baking all day, the sun was shining, and a fire burning, the boiler never ran, and the temperature was above the set point. After the sun sets, the oven is turned off, and the fire goes out, and the thermostats finally call for heat, it take hours to raise the floor temperature. When we woke up around 5, the temperature was still a degree or two below the set point, depending on which room. The anticipation isn’t dialed in yet, so I’m pretty sure that it will overshoot the set point. There is an outdoor temperature sensor that lets the boiler compensate for cold vs warm days, and I’m still tweaking that curve.

Today will start off delivering some of the stuff that my wife has been baking, with some stops for shopping (like HF and the welding supply), then hopefully chill in front of the fire with the wife.

 

[Looking4new]

Good morning, the low is 14 and going to a high of 25°F. Wind SSE 12 mph. The snow is just starting. They are still talking 4". On top of the inch I didn't bother to plow.

I will take a look at the accumulation around 9 and again at noon, then make a decision regarding plowing. The block heater will get turned on about 3 hours before I go out to plow. There is a 'risk' of freezing rain sometime after midnight. At 14 overnight and 19 tomorrow, somehow I don't think there will be any freezing rain. Time will tell.

An energy conservation day until I have to go out and plow.

Have a safe day all

 

[DarkBlack]

0F right now. Ready for spring

 

[wngsprd]

Got all bundled up to do morning chores outside...then came in and unbundled, but remembered that I needed something from truck. Decided to just tough it out with a quick jog to the truck...crazy how fast 16F will chill you, even without wind.

Rip, glad you had a great day...seems like you were owed one or two.

Thomas, hope Boo okay and comes back.

 

[scott_vt]

Good Morning,
Ct, 1 to start going to 24 ! Clear skies and sun is streaming over the horizon !
Not used to this cold yet, but we have it no matter what I want !

Fatjay, congrats to you, great Christmas present !

Yesterdays Popcorn and Candy Cane delivery to the area kids went well ! We had quite a few donations to our company ! Last night just took it easy and watched a Christmas movie with Kathleen, until I fell asleep in my chair ! She woke me up at 10 and told me to go to bed !

Not a lot planned for today, although we go to our nieces house tonite for some pre Christmas celebration!

Hope all have a wonderful start to their week !

 

[Buppies]

Cannot tolerate cold like I used to, just more layers keep me happy. Actually I still enjoy cold and snow we just do not get much anymore. In the 60s 70s 80s we got a lot I love the four seasons we have a better place to live I cannot imagine

 

[Kyle_in_Tex]

Looks like church in Fedor TX.

ding ding ding winner winner chicken dinner! Good memory Ron. Within eyesight of Don's parents' place.

Ron right, Fedor Church, I have put up those lights many times. Thanks for the pic Kyle.

Welcome, I saw it on FB and loved it.

Morning. Lows have been in the upper 20's, highs in the upper 50's. Should be near 60 for Christmas day..... that's just not right.... I remember a Christmas day back in the early 1990's that hit 72°. That really didn't seem right.....

No precipitation/moisture for over 36 days now. The drought monitor is creeping up....

Please keep us in your prayers...and some extras too.
Dona is not doing well. I'm not sure if she'll make it to Christmas without going back into the hospital (which she is refusing to do right now). She wants to be here with family.

It's gotten to the point where the pain meds aren't working. She got up this morning for maybe 45 minutes and is back in bed.

I don't know what else to write.....

Everyone have a great day!

Thank you for sharing. We are praying.

Primeweld MIG 285. No fume extraction.
I’ve been very happy and impressed with Primeweld. I also have their TIG225 and Cut 60. I use the plasma cutter with a CNC table, all of their equipment has exceeded my expectations.

You gonna weld bulldozer tracks to a battleship? I saw on the link that they are backordered thru Jan 25th ?

My wife woke me up with something this morning.

While we agree'd to not say anything for the first 3 months, all of her friends knew by lunch. Including my mother.

So why not, one more jewsian to the mix.

CONGRATS Jay!!!

 

[bdhsfz6]

It would be a good morning if it weren't -9F with snow on the way. It's going to be one of those days where I'm thankful to have a cab on the tractor!