buckeyefarmer
Epic Contributor
I’d take an impact hammer drill with chisel bit.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17579545
buckeyefarmer
Epic Contributor
Walked the trail in town again. One app shows 1.6 miles in 26 minutes, other app shows 2.6 miles in 45 minutes which is the time we walked.
We walked the loop twice. Afterwards as we were cooling off, a guy asked us how we liked the trail. He is the guy that got the trail created, and it’s named for him. Said he was on city council over 20 yrs. Nice guy.
Calling for storms later. Might try to get my yard mowed although not pressing. Calm, no wind.
Need to pick more tomatoes, and start preparing for canning.
Wife just brought out hummingbird feeder ready to hang. Our first time putting one up. I see one around a good bit.
We walked the loop twice. Afterwards as we were cooling off, a guy asked us how we liked the trail. He is the guy that got the trail created, and it’s named for him. Said he was on city council over 20 yrs. Nice guy.
Calling for storms later. Might try to get my yard mowed although not pressing. Calm, no wind.
Need to pick more tomatoes, and start preparing for canning.
Wife just brought out hummingbird feeder ready to hang. Our first time putting one up. I see one around a good bit.
Attachments
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,241
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
ExMark Lazer Z 31 hp Kawasaki 60 in deck side discharge not FI wish it was but she loves it has very very nice seat
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,241
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Kilroy that’s funny
KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,859
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
According to comments, it is accurate, too!
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,241
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Started raining just a few minutes ago now slowing down
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,241
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Nice limes Ken
buckeyefarmer
Epic Contributor
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,368
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
Or rent a small electric jack hammer.
daugen
Epic Contributor
out with the old
in with the new
Makita chain saw zipped right through dried out rotted wood
got about a third in the trash can, will feed the can next two weeks.
got a little hoardy on the old seats, I had recovered them with cedar two years ago.
That stuff was seriously expensive. Since I put boards on with torx screws, won't be hard to unscrew.
not sure what to use it for but cedar lasts a long time.
dark green umbrella comes in tomorrow. Need to lug this one to another spot. New one goes in hole in table.
gave everything a good rub down in 303
did not get far with rv radio. Need to see if original manual is in rv with the "keys" to this thing.
It's clearly dysfunctional, whole unit has dropped down and is on an angle.
Guess I should invest in those mini plastic pry bars
in with the new
Makita chain saw zipped right through dried out rotted wood
got about a third in the trash can, will feed the can next two weeks.
got a little hoardy on the old seats, I had recovered them with cedar two years ago.
That stuff was seriously expensive. Since I put boards on with torx screws, won't be hard to unscrew.
not sure what to use it for but cedar lasts a long time.
dark green umbrella comes in tomorrow. Need to lug this one to another spot. New one goes in hole in table.
gave everything a good rub down in 303
did not get far with rv radio. Need to see if original manual is in rv with the "keys" to this thing.
It's clearly dysfunctional, whole unit has dropped down and is on an angle.
Guess I should invest in those mini plastic pry bars
