Good morning!!!!

[Kyle_in_Tex]

3/12 is the date Ron

Prayers for Bupps and Alien.

41F going to 72 maybe. Time to go to work. A guy wants me to drill through a stainless 10-32 bolt with a small drill, and then put a .008" wide o-ring groove on the bottom of the threaded end. I might change up his design a bit.

Ron, I have a friend with 2 Honda Vtwin 750's, I know they are chain drive. He uses 1 for parts, and commutes 110 miles round trip daily.

Prayers for our team and our country.

 

[daugen]

thanks Paul, if I get that far, I will ask for both options.

 

[txdon]

Good morning! 37˚F heading to the 70s, sunny, light south wind. Ron I did have backups on the phone and everything transferred. I guess the specific phone was paired to my devices not the back-up. I don't know but every thing works now.

I reduced my monthly phone bill by about $30. Now I looking to reduce my internet monthly. has anyone had any experience with one of these? MetroSMART Hotspot™ - Wi-Fi Access on The Go


Popgadget, The 3-D printers are bigger in Texas. Here is one making a 3-D house.

3D-printed houses from Austin tech company ready to go on the market

Austin-based tech company Icon partnered with a developer from Kansas City to build the homes in east Austin.

www.kxan.com

 

[Popgadget]

Popgadget, The 3-D printers are bigger in Texas.

I have always heard that everything is bigger in Texas!

 

[wngsprd]

Billy hope the den is now unusable. Glad you are getting vaccine, sorry about drive

I forgot to add that when I was finished cutting up the tree, I pulled the firewood rounds back from the den holes so the foxes could use it again, if they wanted. Here they are a couple of years ago.

 

[wngsprd]

Was 24 went I went out this morning, getting up to 57 with sun and contrails. mid 70 by end of week, then cold again.

Like most of you, only day after vaccine reaction is soreness in my arm.

Don, would that plastic house be a fire hazard? I didn't get audio on that video, so not sure what the material was.

Rick, great photo of the snow/ice....may never see it like that again.

RNG, I need to split and stack my firewood today, too.

 

[Thomas]

I forgot to add that when I was finished cutting up the tree, I pulled the firewood rounds back from the den holes so the foxes could use it again, if they wanted. Here they are a couple of years ago.

For the last 2 years Mr. Mrs, Fox has call this home for the family.

 

[toppop52]

I get 2 bars with the new service and new phones in the valley here which is 100% better than the old ones and I no longer need the M-Cell.

Well send it back then! No refunds.
I have absolutely no use for it, but I couldn’t resist. LOL

 

[check]

Good morning, no where near as cold as Check in Toronto, though the weak sun is not making much impression on the ice in the weather bucket.

Ron, that must be a great feeling to be able to safely visit family again.

Digging out a gatepost that has rotted off always seems to be a lot of effort. A few days ago I welded up some scraps of steel to go around 3 sides of a stump, thinking that I would then only need to dig down say 18 inches, screw in 4 bolts and pull out the post with the loader. I had drilled and tapped the steel for M12 bolts , though when I rummaged in the shed I couldn't find any long enough, instead I tried using coach screws. Utter failure, the coach screws bent and pulled through the rotten timber, I ended up digging down almost 4' on two sides before I could get it out. Never mind, I'm sure it won't be long before the next post snaps off and I can try again

Actually Eric, I am up at the cottage, 2.5 hours NW of Toronto. (Have been up here “escaping” from Covid for a year now, working from “home”). Toronto is a LOT warmer, and going up to 15 degrees Celsius this week (59F)! Dramatic changes from night to day around here. Great for the upcoming Maple syrup season!

 

[Popgadget]

Don, would that plastic house be a fire hazard? I didn't get audio on that video, so not sure what the material was.

looked like concrete to me.