You are going to change the stability of that machine when that bagger gets loaded up. If you proceed, best install a swivel type hitch that keeps your rider on all 3 tires should it roll. I can't even fathom backing this thing with your current rider.
Gonna need some help on this one.
- Thread starter weavertg14543
- Start date
- Views: 5841
Republic of Texas
Bronze Member
Put it on the front & push it?
coolreinfarm
Silver Member
- Joined
- Mar 14, 2011
- Messages
- 233
- Tractor
- jimna 254
I would buy a cheap craftsman or cub cadet garden tractor on Craigslist and mount the vac to that rather than fight a three wheel mower. Just a thought.
OP
weavertg14543
Member
- Joined
- Aug 17, 2017
- Messages
- 47
- Location
- rush,ny
- Tractor
- john Deere gator 6x4 ferris pro cut s 61 inch 67 cub cadet Kubota ls3130
Thats the plan
coolreinfarm
Silver Member
- Joined
- Mar 14, 2011
- Messages
- 233
- Tractor
- jimna 254
Grandmother will be happy, and you'll be her favorite.
CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 9,193
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
I don't understand all the concern
There is no different "hose length" requirement than if the rig were four wheel.
The sulky has two bolts on the hoop frame that appear perfect for a hitch mount.
Skip the double triple articulated gizmo (though that is a great solution) , just run a pintle hitch. They provide plenty of motion for any practical purpose.
One question, Are the drive wheels on the mower chassis, independent? Or does the sulky do all the steering? Not that it really matters. But if the sulky does the steering without any power assist, dragging a trailer will take a lot of upper body strength to make sharp or quick turns.
There is no different "hose length" requirement than if the rig were four wheel.
The sulky has two bolts on the hoop frame that appear perfect for a hitch mount.
Skip the double triple articulated gizmo (though that is a great solution) , just run a pintle hitch. They provide plenty of motion for any practical purpose.
One question, Are the drive wheels on the mower chassis, independent? Or does the sulky do all the steering? Not that it really matters. But if the sulky does the steering without any power assist, dragging a trailer will take a lot of upper body strength to make sharp or quick turns.
Here are some similar links:
