madmax45242
New member
I have a 2008 Mahindra 2615 with a 3 cylinder mitibisha diesel engine. where is the glow plugs location at and what should I torque them to. Thank you for your help.
glow plugs location
- Thread starter madmax45242
- Start date
- Views: 9056
George2615
Super Member
Welcome to TBN............................
The 3 glow plugs are on the right side of the motor just next to the valve cover. You will see a single wire that feeds power to the front plug. The other 2 are connected by a metal strip. You'll need to remove the feed wire and metal strip connecting all 3 then you can remove each plug to test or change them. I don't know the torque spec. but when I changed the plugs on my 2615 I put never sieze on the threads and tightened them down until snug (kinda like a spark plug in a car tight).
The 3 glow plugs are on the right side of the motor just next to the valve cover. You will see a single wire that feeds power to the front plug. The other 2 are connected by a metal strip. You'll need to remove the feed wire and metal strip connecting all 3 then you can remove each plug to test or change them. I don't know the torque spec. but when I changed the plugs on my 2615 I put never sieze on the threads and tightened them down until snug (kinda like a spark plug in a car tight).
Last edited:
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
:welcome:
To the forum from Alabama.
To the forum from Alabama.
