G'day Everyone... New to this.....

[wercs4me]

G'day everyone... I am new to this Forum... I have a 150 acre property in Kilcoy Queensland Australia.. We have a Massey Ferguson 184-4 Loader with a few attachments, and and Iseki TL2800... Going to run a Fert/Spreader on the Iseki... can anyone tell me the PTO speed and gear ratio to run the spreader. Thought I would ask, instead of the trial and error method. TIA BoB

 

[oosik]

Welcome to TBN & the forum - wercs4me. I would take a stab at 540 rpm as a starter for the PTO. And I'd run the Iseki at a fairly slow speed. If you have access to an owners manual for the spreader - that might give you an idea of the land speed to get the correct application. Do you know the brand of spreader?

 

[Wyobuckaroo]

G'day from the Great White North... eh...

I'm going to guess.... A 6 spline pto = 540 rpm
A 21 spline = 1000 rpm...

Have you had any of the fire or flood troubles in that part of the country ??

 

[ovrszd]

Welcome to TBN Mate.

Can't help you with the questions. As others have said, I'd assume 540 PTO speed. Ground speed, I have no idea.

 

[Wagtail]

G'day Cobber and welcome to TBN from Tassie.

Enjoy the site.

 

[Thomas]

:welcome: to TBN...enjoy.

 

[Seven Gables]

Most fertilizer spreaders I’ve used including my lime/fertilizer spreader give a 40ft width spread at 540pto speed , then set your ground speed to the gear that gives you the rate per acre you want to apply. Any spreader I’ve used has a chart affixed to it that shows weight of material in pounds per cubic foot, gate opening in inches and speed to travel to achieve desired rate per acre.

 

[wercs4me]

Thanks everyone... Info. is much appreciated.

 

[MF RED in MT]

Welcome to TBN, hope you solved your PTO speed and gear ratio information for your spreader.

KC