robstaples
Gold Member
I am switching to a BX2680 model from a B3350. ( Unit too big) My B unit has the GCK60-30B catcher. The base blower is the same, just the mount system. Because to the larger B tires, the blower was hung further back.
I am planning to copy the Kubota design and have bought some tractor brackets. My blower needs a 3/4 shaft welded on as a 3PH mount.
So I was hoping an owner could measure a couple of distances to save my trial and error effort. Measure from the 3pt flange to the face of the fan. Blue lines on pic.
I'm also hoping I can expand the 3 bags to a single larger volume for the fall leaves.
thanks in advance.
rob
I am planning to copy the Kubota design and have bought some tractor brackets. My blower needs a 3/4 shaft welded on as a 3PH mount.
So I was hoping an owner could measure a couple of distances to save my trial and error effort. Measure from the 3pt flange to the face of the fan. Blue lines on pic.
I'm also hoping I can expand the 3 bags to a single larger volume for the fall leaves.
thanks in advance.
rob