GC2310 Front Loader Valve

[darchetti]

Hello Hoping someone can help
While clearing snow yesterday the front loader hydraulic valve started to leak fluid. It was only a few drops so I kind of avoided it and figured I would check it when I finished. The float on the bucket stopped working so I pulled back to boot and it was full of fluid. Turns out that it was more than a few drops.

It appears to be leaking from around the shafts that control the hydraulics (sorry don't know what they are called)

Any suggestions? Do I need to replace valve or can it be rebuilt it?

 

[MFRED]

You can replace the seals on the spools (shafts). They are O-rings that can be replaced if you take the valve ends off. The original seals will last longer, but, regular O-rings can be used if need be.

 

[darchetti]

great thanks. replaced orings and it is working like a champ.